| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP6528 — Presario 2240, 2244ES, 2246, 2248 System ROM Upgrade
| SoftPaq Number |
SP6528 |
| Filename |
SP6528.EXE |
| Size |
373K |
| Date |
May 8, 1998 |
| Version |
6.0.8 (5/8/98) |
| Operating System |
All |
| Products Affected |
ONLY Compaq Presario Models 2240, 2244ES, 2246, 2248 CAUTION: Applying this ROM upgrade to other models may render your computer useless. |
Readme
SOFTPAQ NUMBER: SP6528
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Presario 2240, 2244ES, 2246, 2248 System ROM Upgrade
VERSION: 6.0.8 (5/8/98)
LANGUAGE: English
CATEGORY: ROMPaqs
DIVISIONS: Consumer
PRODUCTS AFFECTED: ONLY Compaq Presario Models 2240, 2244ES, 2246, 2248
CAUTION: Applying this ROM upgrade to other models may render your
computer useless.
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: May 8, 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.01
SUPERSEDES: N/A
DESCRIPTION: Creates a bootable ROM upgrade diskette that can be used
to upgrade the System ROM to the 5/8/98 version in ONLY the Presario
models specifically mentioned in the PRODUCTS AFFECTED section above.
Enhancements/Fixes:
- Modem detection after waking up from sleep or reboot was improved.
- Prevented "Sleep" button from being acknowledged during Power up.
- Corrected issue of loss of F10 Setup customizations when unit was
powered off while unit was in "Sleep" mode.
HOW TO USE:
1. Obtain a formatted 1.44-MB diskette.
2. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is an executable
with a filename based on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file
and follow the on-screen instructions. You will be prompted to
insert the formatted diskette in a drive to create the diskette.
4. After the diskette has been created, you may delete the
SoftPaq file downloaded in step 2.
5. From Windows 95, shut down the computer.
6. Turn off the computer. Insert the created ROM upgrade diskette in
drive A: and turn on the computer, allowing the system to boot from
the diskette. The ROM upgrade procedure starts automatically.
IMPORTANT: DO NOT TURN OFF THE COMPUTER DURING THE UPGRADE PROCESS!
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|