PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP6522

SP6522 — Presario PC Diagnostics

SoftPaq Number SP6522
Filename SP6522.EXE
Size 1249K
Date 30 March 1998
Version 10.25 Rev A
Operating System All
Products Affected * All units below Manufactured before April 1st, 1998 * Presario 400 Series Presario 500 Series Presario 600 Series Presario 700 Series Presario 800 Series Presario 900 Series Presario 2000 Series Presario 3000 Series Presario 4000 Series Presario 5000 Series Presario 6000 Series Presario 7000 Series Presario 8000 Series Presario 9000 Series

  Download SP6522.EXE  


Readme

SOFTPAQ NUMBER:  SP6522
PART NUMBER:  276662-001
FILE NAME:  N/A
TITLE:  Presario PC Diagnostics 
VERSION:  10.25 Rev A
LANGUAGE:  English

CATEGORY:  Consumer/Diagnostics

PRODUCTS AFFECTED:     
* All units below Manufactured before April 1st, 1998 *
Presario 400 Series
Presario 500 Series
Presario 600 Series
Presario 700 Series
Presario 800 Series 
Presario 900 Series
Presario 2000 Series
Presario 3000 Series
Presario 4000 Series
Presario 5000 Series
Presario 6000 Series
Presario 7000 Series
Presario 8000 Series
Presario 9000 Series

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  30 March 1998

SOFTPAQ UTILITY VERSION:  2.x

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  N/A

DESCRIPTION:  Creates a bootable diskette containing Personal Computer 
Diagnostics for Compaq Presario computers.  PC Diagnostics can inspect the 
state of the computer and its devices.  It is pre-installed on the Diagnostics 
Partition.  The diskette in this SoftPaq can be used to update this utility on 
the Diagnostics Partition or to restore it if the Diagnostics Partition has been 
destroyed.   Diagnostics can be run by pressing F10 during power-up or reboot 
when the cursor jumps to the upper right corner of the screen.  Or it can be run 
directly from this diskette.

Enhancements/Fixes:
 - Adds support for new Presario models.  All Presario Models manufactured before
   April 1st, 1998 should be supported.

HOW TO USE:

1. Obtain one (1) formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskettes in a drive to create the diskettes.

4. After the diskettes have been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Refer to README.TXT on the diskette for instructions on using the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home