SOFTPAQ NUMBER:  SP6344
PART NUMBER:  
FILE NAME:  SETUP.EXE
TITLE:  Netelligent Management Software PMM for Repeaters (2524, 2624, 2724, 2824)
VERSION:  2.1.2
LANGUAGE:  English

CATEGORY:  Comm-Network/Software Solutions

PRODUCTS AFFECTED:  Compaq Netelligent 2624 and 2824 Managing Repeaters
		    Compaq Netelligent 2524 and 2724 Manageable Repeaters 

OPERATING SYSTEM:  Microsoft Windows 95; Windows NT 3.51 or 4.0

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  3 March 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP5830

PREREQUISITES:  Compaq Netelligent Management Software Foundation Module, 
Version 2.1.1.  Version 2.1.1 is available in SoftPaq SP6342, which also 
lists system requirements.

System Requirements:
? 486 or later processor
? 16 MB of RAM, 24 MB is recommended

DESCRIPTION:  Unpacks a setup file to install a PMM (Product Management Module) 
that provides support for the Netelligent 2624 and 2824 Managing Repeaters and 
the Netelligent 2524 and 2724 Manageable Repeaters.  It is designed to augment 
the functionality of the Compaq Netelligent Management Software Version 2.1.1
Foundation Module.  Refer to SoftPaq SP6342 for the Foundation Module and a 
description of the features of Compaq Netelligent Management Software.  


IMPORTANT!  For a 2624 Repeater to be compatible with a 2824 Repeater in the 
same stack, both must be running firmware version 2.0 or later.
This firmware is included within this Softpaq.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
It unpacks 2 files (requiring an additional 5.1 MB of hard drive space):
 SETUP.EXE
 README.TXT

You will be given the chance to specify the target directory for 
the files, or default to the download directory.

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. Run SETUP.EXE and follow the on-screen instructions.

5. After the installation has completed successfully, you may 
delete the SETUP.EXE file.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies