| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP6301 — Armada 7300/7700 S3 Video Driver for Windows NT 4.0
| SoftPaq Number |
SP6301 |
| Filename |
SP6301.EXE |
| Size |
187K |
| Date |
24 February 1998 |
| Version |
1.02.21 Rev A |
| Operating System |
Windows NT 4.0 |
| Products Affected |
Compaq Armada 7300 and 7700 Series |
| Supersedes |
SP3707 PREREQUISITE: Armada S3 Display Utility For Windows NT 4.0, Version 1.03.06, available in SoftPaq SP3708. |
Readme
SOFTPAQ NUMBER: SP6301
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Armada 7300/7700 S3 Video Driver for Windows NT 4.0
VERSION: 1.02.21 Rev A
LANGUAGE: English
CATEGORY: Portables/Drivers
PRODUCTS AFFECTED: Compaq Armada 7300 and 7700 Series
OPERATING SYSTEM: Microsoft Windows NT 4.0
SYSTEM CONFIGURATION: System ROM dated no earlier than 12/16/97
NOTE: Run F10 Setup to check System ROM date.
EFFECTIVE DATE: 24 February 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 3.1
SUPERSEDES: SP3707
PREREQUISITE: Armada S3 Display Utility For Windows NT 4.0, Version 1.03.06,
available in SoftPaq SP3708.
DESCRIPTION: Unpacks files needed to install the "S3 Video Drivers for
Microsoft Windows NT 4.0 Using Compaq/S3 Video Drivers" for the Compaq
Armada 7300 and 7700 Series. Optionally creates an installation diskette.
Enhancements/Fixes:
- Resolves NT desktop corruption that sometimes occurs when user resumes
from Hibernation if ScreenSaver was launched before Hibernation.
- Resolves problem with Display Data Channel (DDC) monitor detection.
- Resolves problem where the Compaq QuickBlack/QuickLock feature does not work
properly with Windows NT 4.0.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the download directory. All files are unpacked into this
newly created directory.
To create the 1 optional installation diskette(s), run MAKEDISK.BAT and
follow on-screen instructions.
3. After the directory has been created, you may delete the
self-extracting file downloaded in step 1.
4. To install, refer to the README.TXT file.
5. After the installation is completed, you may delete the directory
created in step 2 if you wish.
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|