PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP6298

SP6298 — Armada Security 32 Support

SoftPaq Number SP6298
Filename SP6298.EXE
Size 773K
Date 24 February 1998
Version 1.10 Rev C
Operating System Windows 95
Products Affected Compaq Armada 7300 and 7700 Series Compaq Armada 7800 Series

  Download SP6298.EXE  


Readme

SOFTPAQ NUMBER:  SP6298
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Armada Security 32 Support
VERSION:  1.10 Rev C
LANGUAGE:  Taiwanese

CATEGORY:  Portables/Drivers

PRODUCTS AFFECTED:  Compaq Armada 7300 and 7700 Series
		    Compaq Armada 7800 Series

OPERATING SYSTEM:  Microsoft Windows 95 and Windows NT 4.0

SYSTEM CONFIGURATION:  System ROM dated no earlier than 05/01/97
		Note:  Run F10 Setup to check System ROM date

EFFECTIVE DATE:  24 February 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to install drivers for Compaq 
Security 32, a Security Control Panel Extension, on Compaq Armada 7300, 
Armada 7700, and Armada 7800 Series notebooks running Microsoft
Windows 95 or Windows NT 4.0.  Optionally creates an installation diskette.

Enhancements/Fixes:  This version fixes the problem where the 
Power-On-Password was not saved correctly when using Windows NT 4.0.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the optional installation diskette, run MAKEDISK.BAT and 
follow on-screen instructions.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\setup
   where <path> is the drive and directory created in step 2
                      - or -
                   a diskette drive letter if using the optional 
                   installation diskette 

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1998, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home