SOFTPAQ NUMBER:  SP6292
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Armada Security 32 Support
VERSION:  1.10 Rev C
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Armada 7300 and 7700 Series
		    Armada 7800 6266/T/5000/D/M/1
		    Armada 7800 6266/T/5000/D/0/1
		    Armada 7800 6266/T/5000/D/0/3
		    Armada 7800 6266/T/8000/D/M/1
		    Armada 7800 6266/T/8000/D/0/1
		    Armada 7800 6266/T/8000/D/0/3

OPERATING SYSTEM:  Microsoft Windows 95
		   Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  System ROM dated no earlier than 05/01/97
		Note:  Run F10 Setup to check System ROM date

PREREQUISITES:  N/A

EFFECTIVE DATE:  24 February 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.x

SUPERSEDES:  SP4553 for Armada 7300 and Armada 7700 Series only
      NOTE:  Armada 1500 Series still requires Version 1.00 Rev A, 
             in SoftPaq SP4553.

DESCRIPTION:  Unpacks the files needed to install drivers for Compaq 
Security 32, a Security Control Panel Extension, on Compaq Armada 7300, 
Armada 7700, and Armada 7800 models listed above running Microsoft
Windows 95 or Windows NT 4.0.  Optionally creates an installation diskette.

Enhancements/Fixes:  This version fixes the problem where the 
Power-On-Password was not saved correctly when using Windows NT 4.0.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the optional installation diskette, run MAKEDISK.BAT and 
follow on-screen instructions.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\setup
   where <path> is the drive and directory created in step 2
                      - or -
                   a diskette drive letter if using the optional 
                   installation diskette 

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1998, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies