SOFTPAQ NUMBER:  SP6254
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 4.0
        (Workstations)
VERSION:  2.05 Rev A
LANGUAGE:  Japanese

CATEGORY:  Workstations/Drivers

PRODUCTS AFFECTED:  Compaq Professional Workstation 5000, 5100, 6000 and 8000

OPERATING SYSTEM:  Microsoft Windows NT 4.0 (Japanese)

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  16 March 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP5896

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description
file and a self-extracting executable file.  The self-extracting executable 
file contains Compaq Support Software for Microsoft Windows NT 4.0 
that supports the following subsystems and features of 
Compaq Professional Workstations:
 
   System Management/Health driver
   Netelligent Family of Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T ISA UTP Controller
    	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller
   NetFlex-3 Network Adapter Family
    	Compaq NetFlex-3/P Controller
    	Compaq NetFlex-3/E Controller
   NetFlex-3 network adapter monitoring, configuration and duplex utility
   SMART Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller
   32-Bit SCSI-2 Family of Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Fast-SCSI-2 Controller option board
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board
	Compaq Wide-Ultra SCSI-3 Controller option board
   32-Bit SCSI-2 Family of controllers
   Matrox Millennium/Millennium II video controller
   ELSA Gloria-L video controller
   ELSA Gloria-Synergy Video Controller
   ELSA Gloria-XL Video Controller
   Diamond Multimedia Fire GL 4000 Video Accelerator
   ESS AudioDrive audio controller
   Compaq Support Software Installation utility

Enhancements/Fixes:

For details, refer to NTREADME.HLP in the created support files.

The release of the Compaq Support Software for Microsoft Windows NT 4.0, 
Version 2.05J Revision A, primarily supports the Compaq Fibre Channel 
Storage System Driver.

Compaq NetFlex-3 Controller (NETFLX3.SYS)
 - Updated the Compaq NetFlex-3 driver to disable autonegotiation in 
    the Physical Layer (PHY) when both speed and duplex are set, thus 
    enhancing network connections.

Compaq Remote Insight Board Driver (CPQRIB.SYS)
 - Updated the Compaq Remote Insight Board driver version number from 
    1.22 to 1.23.  This updated driver includes a fix for a random 
    problem that prevented all of the system events from being copied 
    to the Compaq Remote Insight Board.

Compaq Remote Insight Board WAN Driver (RIBWAN.SYS)
 - Modified the OEMSETUP.INF file to perform a check to determine if 
    a Service Pack needs to be reapplied to the system after RAS is 
    installed.  This check is performed because the files taken from 
    the original Microsoft Windows NT 4.0 media during RAS install 
    may not be the same as the files previously applied on the system 
    from the Service Pack media.

Compaq Support Software for Microsoft Windows NT Setup (SETUP.EXE)
 - Modified the SETUP.EXE file to perform a check to determine if a 
    Service Pack needs to be reapplied to the system after RAS is 
    installed.  This check is performed because the files taken from 
    the original Microsoft Windows NT 4.0 media during RAS install may 
    not be the same as the files previously applied on the system from 
    the Service Pack media.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       WKST.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       WKST.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.