SOFTPAQ NUMBER:  SP6193
PART NUMBER:  388396-002
FILE NAME:  N/A
TITLE:  Compaq Fibre Channel Backup Diagnostics for Windows NT 
VERSION:  2.03 Rev H
LANGUAGE:  English

CATEGORY:  Diagnostics-Setup

DIVISIONS:  Systems

PRODUCTS AFFECTED:
Compaq StorageWorks Enterprise Backup Solution on the following
products:
Compaq Proliant 6500, Proliant 6000/7000, Proliant 5500/3000,
Compaq Proliant 5000, Proliant 1600/1200, Proliant 2500,
Compaq Proliant 1500, Proliant 850, Proliant 800,

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  April 26, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  6089

DESCRIPTION:
Unpacks files needed to install Compaq Fibre Channel Backup Diagnostics
for Windows NT.  This utility helps in identifying problems with the  
Fibre Channel Tape Controller and the DLT 15 Cartridge Libray Model 3570
on the Fibre Channel Arbitrated Loop.  Is is also used to upgrade firmware
for the Fibre Channel Tape Controller and the DLT 15 Cartridge Library
Model 3570.

Enhancements/fixes:
- Support for Compaq StorageWorks TL895 DLT Library


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the two optional installation diskettes, run MAKEDISK.BAT and 
follow on-screen instructions.

3. To install Interactively:
       a) Remove all previous versions of Compaq Diagnostics for Windows NT.
          - Select Start, Settings, Control Panel
          - Select Add/Remove Programs
          - Select Compaq Diagnostics for Windows NT and "Add/Remove"
   
       b) Install this version of Diagnostics for Windows NT
          - Insert diskette #1 into drive A: if installing from optional diskettes
          - Run A:\SETUP.EXE or <path>\SETUP.EXE where <path> is directory from step 2      
          - Select Next
          - Select Finish

       c) Restart the computer for the changes to be in effect
   
   To install non-interactively ("silently"):
       a) Go to the download directory from step 2 above, or copy the contents of all 
         two (2) optional installation diskettes into a directory on the hard drive.
      
       b) Run SETUP.EXE -S from the directory in a) above. 
   
       c) Restart the computer for the changes to be in effect.

4. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies