SOFTPAQ NUMBER:  SP6093
PART NUMBER:  277294-004, 277295-004, 277296-004, 277297-004, 277298-004, 277299-004
FILE NAME:  N/A
TITLE:  Support Software for Novell Products 
VERSION:  5.03 Rev A
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Systems

PRODUCTS AFFECTED:  All Compaq ProSignia and ProLiant Servers

OPERATING SYSTEM:  Novell NetWare 3.2
                   intraNetWare 4.11
                   intraNetWare SMP 4.11
                   NetWare SFT-III 4.1x
                   NetWare 5

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  March 29,1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP6091

DESCRIPTION:  Creates the Support Software for Novell Products Diskettes (NSSD). 
The NSSD diskettes contain NetWare and intraNetWare drivers, NetWare Loadable 
Modules (NLMs), and support information to optimize the performance of NetWare and 
intraNetWare on Compaq servers. This software enhances the performance of Compaq 
options such as Compaq Drive Array controllers, Compaq 32-Bit SCSI-2 controllers, 
and Compaq CD-ROM drives.

Enhancements/Fixes:  

NETWORK DRIVER UPDATES

  N1000.LAN v1.04 - NSSD 5.03
  *Adds support for the Compaq Fast Ethernet Gigabit 1000 SX Upgrade Module NC6132.


SERVER MANAGEMENT UPDATES

  CPQHLTH.NLM v4.06
  *Adds support for the Compaq ProLiant 6400R server.

   NOTE:  Power Supply Hot Plugging on the Compaq ProLiant 6400R
          server requires a 6 second delay between both removal and
          insertions.  Users should wait 6 seconds after pulling and
          before inserting power supplies.

  CPQONLIN.NLM v2.40 - NSSD 5.03
  *Adds support for redundant controllers.
  *Adds support for RAID migration.
  *Adds support for stripe size migration.

  CPQSBD.NLM v2.15 - NSSD 5.03
  *Corrected a potential problem where an ABEND might occur when using the 
   PCI Hot Plug Push Buttons.
  *Was enhanced to enable hot add to work in situations where low resources
   are available.


STORAGE UPDATES

  CPQSCSI.HAM v1.32 - NSSD 5.03
  *Adds support for the Compaq 64-Bit Dual Channel Wide Ultra2 SCSI Adapter.




HOW TO USE:

 1. Download the SoftPaq to a directory on your hard drive and change 
    to that directory.  The file that is downloaded is an executable with 
    a filename based on the SoftPaq Number above.

 2. From that drive and directory, execute the downloaded file 
    and follow the on-screen instructions.  The following files will be
    in that directory:
      277294us._01
      277294us._02
      277294us._03
      277294us._04
      277294us._05
      277294us._06
      qrst5.exe

 3. Type QRST5 to run the diskette builder program. You will have the option
    of creating all NSSD diskettes or selecting individual diskettes to
    create. Once you make a selection, you will be prompted to inseret
    diskettes accordingly.

 4. After the diskettes have been created, you may delete the downloaded
    SoftPaq file and the other files created in step 2.

 5. For installation instructions, refer to INSTALL.RDM on diskette 2.


Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.