PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP6088

SP6088 — AP400 Identification Utility for Compaq Professional Workstation

SoftPaq Number SP6088
Filename sp6088.exe
Size 470K
Date October 13, 1998
Version Version 2.10 Rev. A
Operating System All
Products Affected Professional Workstation AP400.

  Download sp6088.exe  


Readme

FILE NAME: Sp6088.EXE 

PART NUMBER:  N/A

FILE NAME: N/A

TITLE:  AP400 Identification Utility for Compaq Professional Workstation

VERSION: Version 2.10  Rev. A

LANGUAGE: English

CATEGORY: Software Solutions

DIVISION: Workstations

PRODUCTS AFFECTED: Professional Workstation AP400.

OPERATING SYSTEM AND VERSION: N/A

SYSTEM CONFIGURATION: N/A

PREREQUISITES: N/A

EFFECTIVE DATE: October 13, 1998

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SUPERSEDES: N/A

SOFTPAQ UTILITY VERSION: 2.x 

DESCRIPTION: For Identification of non-qualified DIMMS installed in AP400

ENHANCEMENT/FIXES: N/A

HOW TO USE: 

1.  Obtain one formatted 1.44 MB diskettes. 

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions.  You will be prompted to insert the formatted diskette 
in a drive to create the diskette.
IMPORTANT: Only a 1.44 MB diskettes can be used, other types of media
cannot be substituted. 

4.  After the diskette has been created, you may delete the SoftPaq file 
downloaded in step 2.

5.  To use, a DOS bootable diskette must be created.  This can be done in one of two ways:
1) Create a DOS bootable diskette and copy all of the files from the diskette 
created by the Softpaq to the DOS bootable diskette.  To use, insert the DOS bootable disk into the 
diskette drive and turn on the machine.

2) Use SP6088.EXE to create a diskette with the software on it, then use the SYS command to make the 
diskette bootable. To use, insert the disk into the diskette drive and turn on the machine.

3) Another alternative is to create the diskette using SP6088.EXE, then boot to Windows 95/98 and 
execute DUMPSPD.BAT from the command line.

NOTE: This software will not execute properly in WindowsNT.



Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home