SOFTPAQ NUMBER:  SP6003
PART NUMBER:  N/A
FILE NAME:  N/A 
TITLE:  Compaq EFS 3.18 for SCO Open Server Release 3
VERSION:  3.18
LANGUAGE:  English

CATEGORY:  Systems/Drivers

PRODUCTS AFFECTED:  Compaq Servers running SCO Open Server Release 3

OPERATING SYSTEM:  
SCO UNIX System V/386 Release 3.2 Version 4.0 with Maintenance Supplement 4.2
SCO Open Desktop or SCO Open Desktop Lite, Release 3.0
SCO Open Server Enterprise 3.0
SCO Open Server Network 3.0
SCO MPX Release 3.0

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  01 Jan 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  SP4987

DESCRIPTION:  Creates the five(5) diskettes of Compaq Extended Feature 
Supplement (EFS) 3.18 for SCO Open Server Release 3.  These five diskettes 
include:
 - EFS Disk 1
 - Boot Time Loadable Drivers (BTLD) Diskette
 - N1 Diskette for ODT
 - N1 Diskette for 3.2V4
 - Documentation Diskette

This is a collection of device drivers to provide maximum performance with 
Compaq hardware, and also utilities to monitor the performance of a Compaq server.  

Changes From EFS 3.17
- ProSignia 200
- Compaq ProLiant Storage System /U
- Compaq Hot Plug Redundant Power Supply
- Compaq Dual Channel Wide-Ultra SCSI-3 Controller

Device Drivers Included in EFS 3.18
- Compaq NetFlex Controller Support
- Compaq Netelligent Controller Support
- Compaq SCSI-2 Support
   - Compaq 32-Bit Fast-SCSI-2 Controller Card
   - Compaq 32-Bit Fast-Wide SCSI - 2/ E Controller Card
   - Compaq 32-Bit Fast-Wide SCSI - 2/ P Controller Card
- Compaq Smart-2/E Drive Array Support
- Compaq Smart -2/P Drive Array Support
- Compaq Smart-2/SL Drive Array Support
- Compaq System Wellness Driver
- Compaq Intelligent Drive Array Support
- Boot-Time Loadable Drivers

Utilities Included in EFS 3.18
- SCSI-2 Management Utility
- Intelligent Drive Array (IDA) Diagnostic Utility
- Compaq System Monitor Utility
- Compaq UPS Support
- Compaq Pagemarq Support
- Compaq Single Launch Point Utility
- Compaq Ultra Diagnostic Utility

HOW TO USE:
1.  Obtain five (5) 1.44-MB diskettes.
2.  Download the SoftPaq to a directory on your
    hard drive and change to that directory.  The file
    that is downloaded is SP6003.EXE
3.  From that drive and directory, execute the SoftPaq file:
    SP6003 [ENTER]
    The following files should be created:
        QRST5.EXE
        EFS318._01
        EFS318._02
        EFS318._03
        EFS318._04
        EFS318._05
        README.TXT

4.  After the files are created, you may delete the
    downloaded file SP6003.EXE if you wish.

5.  Refer to README.TXT for instructions on creating
    the five (5) diskettes.

Copyright 1989-1998, Compaq Computer Corporation.  All rights reserved.
Copyright 1991-1998, The Santa Cruz Operation, All rights reserved
Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies