SOFTPAQ NUMBER:  SP6001
PART NUMBER:  N/A
FILE NAME:  N/A 
TITLE:  Compaq EFS 5.18 for SCO OpenServer Release 5
VERSION:  5.18
LANGUAGE:  English

CATEGORY:  Systems/Drivers 

PRODUCTS AFFECTED:  Compaq Servers running SCO OpenServer Release 5

OPERATING SYSTEM:  
SCO OpenServer Release 5.04 Enterprise
SCO OpenServer Release 5.04 Host
SCO OpenServer Release 5.02 Enterprise
SCO OpenServer Release 5.02 Host
SCO OpenServer Release 5.0 Enterprise
SCO OpenServer Release 5.0 Host
SCO Internet FastStart

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  01 January 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  SP4986

DESCRIPTION:  Creates six diskettes containing the Compaq Extended
Feature Supplement (EFS) 5.18 for SCO OpenServer Release 5.
These six diskettes include:
 - EFS Disk 1
 - EFS Disk 2
 - Boot Time Loadable Drivers (BTLD) Diskette
 - Compaq N1 Boot Diskette for Releases 5.0 and 5.02
 - SCO N1 Boot Diskette for Release 5.04
 - Documentation Diskette

This is a collection of device drivers to provide maximum performance with 
Compaq hardware.  It also includes several utilities to monitor and increase 
the performance of your Compaq server.

Changes From EFS 5.17
- ProSignia 200
- Compaq ProLiant Storage System /U
- Compaq Hot Plug Redundant Power Supply
- Compaq Dual Channel Wide-Ultra SCSI-3 Controller


Device Drivers Included in EFS 5.18
        - Compaq NetFlex Controller Support.
        - Compaq Netelligent Controller Support.
        - Compaq SCSI-2 Support.
        - Compaq 32-Bit Fast-SCSI-2 Controller Card.
	- Compaq 32-Bit Fast-Wide SCSI - 2/ E Controller Card.
	- Compaq 32-Bit Fast-Wide SCSI - 2/ P Controller Card.
        - Compaq Smart-2 /E Drive Array Support.
        - Compaq Smart-2 /P Drive Array Support.
        - Compaq Smart-2SL Drive Array Support
        - Compaq System Wellness Driver.
        - Compaq Intelligent Drive Array Support.
        - Boot-Time Loadable Drivers.

Utilities Included in EFS 5.18
        - SCSI-2 Management Utility.
        - Intelligent Drive Array (IDA) Diagnostic Utility.
        - Compaq System Monitor Utility.
        - Compaq Single Launch Point Utility.
        - Compaq Ultra Diagnostic Utility.

HOW TO USE:

1.  Obtain six (6) 1.44-MB diskettes.

2.  Download the SoftPaq to a directory on your hard
    drive and change to that directory.  The file that
    is downloaded is SP6001.EXE

3.  From that drive and directory, execute the SoftPaq file:
SP6001 [ENTER]
The following files should be created:
        QRST5.EXE
        EFS518._01
        EFS518._02
        EFS518._03
        EFS518._04
        EFS518._05
        EFS518._06
        README.TXT

4.  After the files are created, you may delete the downloaded
    file SP6001.EXE if you wish.

5.  Refer to README.TXT for instructions on creating the six (6) diskettes.

Copyright 1989-1998, Compaq Computer Corporation.  All rights reserved.
Copyright 1991-1998, The Santa Cruz Operation, All rights reserved
Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies