SOFTPAQ NUMBER:  SP5987
PART NUMBER:  N/A
FILE NAME:  GDCPQ013.808
TITLE:  Deskpro ATI Rage Pro Turbo 1x Video ROM 
VERSION:  1.30.80 Rev A
LANGUAGE:  English

CATEGORY:  Desktops/ROMPaq

PRODUCTS AFFECTED: Compaq Deskpro EN, Deskpro EP, and Deskpro SB Series 
                   with an ATI Rage Pro Turbo 1x Graphics Controller 
            NOTE: To determine if your model has this controller --
                   In Windows 95, go to the Control Panel, then select the 
                   System icon, the Device Manager tab, and the Display 
                   adapters icon.
		   In Windows 98, go to the Control Panel, then select the 
                   System icon, the Device Manager tab, and the Display 
                   adapters icon.
                   In Windows NT, go to the Control Panel, then select 
                   Display, Settings, Display type.
                   In Windows 3.x, go to Program Manager, Main Program Group 
		   then select Windows Setup.
		   In IBM OS/2, go to the OS/2 System, then select System 
		   Setup, Display Driver Install and Primary Display.

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  June 25, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to install the video ROM for 
the ATI Rage Pro Turbo 1x Graphics Controller used in certain models of the 
Deskpro EN, EP, and SB Series (see NOTE above).  Optionally allows an 
installation diskette to be created.  The video ROM can only be updated 
from DOS Mode.  It cannot be updated from a DOS session.

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into a subdirectory named 
Disk_01 that is created under the download directory or the directory 
specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The video ROM may be installed directly from the files on the hard 
drive or an installation diskette can be created.  
To create an installation diskette, run MAKEDISK.BAT.

To install the video ROM, restart the computer in DOS Mode and 
run FLASH.EXE. 

IMPORTANT:  This must be run from DOS Mode (not a DOS session). 

To install from the hard drive, enter:

   <path>\disk_01\flash gdcpq013.808

   where <path> is the drive and directory chosen in step 2

To install from the optional installation diskette, enter:

    A:\flash gdcpq013.808
    
5. Follow the on-screen instructions to complete the installation.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.