SOFTPAQ NUMBER:  SP5894
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 4.0
        (Files rather than diskettes)
VERSION:  2.04J Rev A
LANGUAGE:  Japanese

CATEGORY:  Workstations/Drivers

PRODUCTS AFFECTED:  Compaq Professional Workstation 5000, 5100, 6000 and 8000;
                    Compaq ProSignia and ProLiant Servers

OPERATING SYSTEM:  Microsoft Windows NT 4.0(Japanese)

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  30 January 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  N/A

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description 
file and a large self-extracting executable file.  The self-extracting 
executable file contains Compaq Support Software for Microsoft Windows 
NT 4.0 that supports the following subsystems and features of Compaq 
Professional Workstations and ProLiant and ProSignia Servers.

   Compaq Integrated Management Display Utility
   Compaq Integrated Management Log Viewer
   Compaq Online Storage Controller Recovery Utility
   Compaq PCI Hot Plug Utility
   Compaq Power Down Manager
   Compaq Power Supply Viewer
   Compaq ProLiant Storage System 
   Compaq Recovery Server, Standby Agent with SMART-2 Support
   Compaq Recovery Server, Online Agent with SMART-2 Support
   Compaq Remote Insight Board Driver
   Compaq Remote Insight Board WAN Driver
   Compaq Remote Monitor Service
   Compaq Support Software Diskette Installation Utility
   Compaq System Management/Health Driver   
   Netelligent Family of Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T ISA UTP Controller	
    	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller
   NetFlex-3 Network Adapter Family
    	Compaq NetFlex-3/P Controller
    	Compaq NetFlex-3/E Controller
   NetFlex-3 network adapter monitoring, configuration and duplex utility
   SMART Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller
   32-Bit SCSI-2 Family of Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Fast-SCSI-2 Controller option board
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board
	Compaq Wide-Ultra SCSI-3 Controller option board
   Diamond Multimedia Fire GL 4000 Video Accelerator
   ELSA Gloria-L Video Controller
   ELSA Gloria-Synergy Video Controller
   ELSA Gloria-XL Video Controller
   ESS AudioDrive Audio Controller
   Matrox Millennium/Millennium II Video Controller
   STB Systems MVP Workstation Display Controller
 
Enhancements/Fixes:

For details, refer to NTREADME.HLP in the created support files.

The release of the Compaq Support Software for Microsoft Windows NT 4.0, 
Version 2.04J Revision A, primarily supplies the new Logitech MouseWare 
software, the ELSA GLoria-Synergy video driver, the Compaq Integrated 
Management Log Viewer, and the Compaq Power Supply Viewer.

Compaq Integrated Management Display Utility
  Added a new version of the Compaq Integrated Management Display 
  Utility that allows you to set the IMD fields for any machine that 
  is running the Compaq Remote Monitor Service.

Compaq Integrated Management Log Viewer
  Added a new utility called the Compaq Integrated Management Log 
  Viewer that allows you to view the Compaq Integrated Management 
  Log for any machine that is running the Compaq Remote Monitor Service.

Compaq Power Down Manager
  Added a new version of the Compaq Power Down Manager that allows 
  you to define the behavior of the power switch for any machine that 
  is running the Compaq Remote Monitor Service.

Compaq Power Supply Viewer
  Added a new utility called the Compaq Power Supply Viewer that 
  allows you to view the redundancy information of the IIC power 
  subsystem and statistics of individual power supplies for any machine 
  that is running the Compaq Remote Monitor Service.

Compaq Remote Insight Board Driver
  Added a fix to the Compaq Remote Insight Board driver, thus updating 
  the version number from 1.21 to 1.22.  This fix keeps the event logs, 
  which are copied onto the Compaq Remote Insight Board, in sync with 
  the event logs on the machine.

Compaq System Management Driver
  Updated the System Management driver version number from 2.55.01 to 2.57.01.

  Improved logging of non-correctable memory events on the Compaq ProLiant 
  6000, 6500, and 7000. A system ROM upgrade is required to properly display
  this information through the Compaq Integrated Management Display.

  Corrected a problem with enabling Compaq Automatic Server Recovery (ASR) 
  via Compaq Insight Manager.

  Corrected a problem with correctable memory error messages in the Windows 
  NT Event Viewer.

  Corrected a problem with marking entries in the Critical Error Log as 
  "corrected" via the Compaq Insight Manager.

  Corrected a problem with marking Compaq Hot Plug Redundant Power Supplies as 
  "redundant" and with showing redundant status within the Integrated 
  Management Log and the Windows NT Event Viewer on the Compaq ProLiant 6000, 
  6500, and 7000

  Corrected a problem with reporting voltage channel failures on the Compaq 
  Hot Plug Redundant Power Supplies used in the Compaq ProLiant 6000, 6500, 
  and 7000, if the supplies were in a redundant configuration.

  Corrected a problem with improperly marking a set of Compaq Hot Plug 
  Redundant Power Supplies as "redundant" on the Compaq ProLiant 1200, 
  1600, and 2500.

  Corrected a resource conflict between the Compaq System Management driver 
  and the Compaq Netelligent 4/16 TR PCI UTP/STP Controller driver.

ELSA GLoria-L Video Driver
  Added support for an updated ELSA GLoria-L video driver.  This driver 
  contains improved buffer management for enhanced performance in OpenGL 
  applications.  A fix was also included in the GLoria display driver to 
  prevent it from causing an erroneous SCSI error message to appear in the 
  NT Event Log.  The Compaq Professional Workstations that may use this driver 
  are indicated in the section entitled Video Support for Compaq Professional 
  Workstations in NTREADME.HLP.

ELSA GLoria-Synergy Video Driver
  Added support for the new ELSA GLoria-Synergy video display driver for 
  Windows NT 4.0.  The Compaq Professional Workstations that may use this 
  driver are indicated in the section entitled Video Support for Compaq 
  Professional Workstations in NTREADME.HLP.

ELSA GLoria-XL Video Driver
  Added support for an updated ELSA GLoria-XL video driver.  A fix was 
  included in the GLoria display driver to prevent it from causing an 
  erroneous SCSI error message to appear in the NT Event Log.  The Compaq 
  Professional Workstations that may use this driver are indicated in the 
  section entitled Video Support for Compaq Professional Workstations in
  NTREADME.HLP.

Logitech MouseWare Software
  Added support for the new Logitech MouseWare software.  This software 
  allows you to program each mouse button on a 3- or 4-button mouse.  
  Logitech MouseWare software is available on the Compaq SmartStart for 
  Workstations CD v1.30 or later.

STB Systems MVP Workstation Display Controller
  Added an updated STB Systems MVP Display Controller that is supported 
  on the Compaq Professional Workstation 6000 and 8000.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       NTSSD.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       NTSSD.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.