| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP5885 — Compaq Microcom 610 ISDN Controller Software Update
| SoftPaq Number |
SP5885 |
| Filename |
SP5885.EXE |
| Size |
21741K |
| Date |
14 March 1998 |
| Version |
1.20 |
| Operating System |
Windows 95 |
| Products Affected |
Compaq Microcom 610 ISDN Controller OPERATING SYSTEMS AFFECTED: Microsoft Windows 95, Microsoft Windows NT |
Readme
SOFTPAQ NUMBER: SP5885
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Compaq Microcom 610 ISDN Controller Software Update
VERSION: 1.20
LANGUAGE: French
CATEGORY: Comm-Network/Drivers
PRODUCTS AFFECTED: Compaq Microcom 610 ISDN Controller
OPERATING SYSTEMS AFFECTED: Microsoft Windows 95,
Microsoft Windows NT
SYSTEM CONFIGURATION: - IBM-compatible Pentium 66-Mhz or greater
- 16 MB system RAM minimum
- At least 50 MB free hard disk space
- Compaq Microcom 610 ISDN Controller installed
EFFECTIVE DATE: 14 March 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: v3.1
SUPERSEDES: N/A
DESCRIPTION: Unpacks the files needed to update the support software for
the Compaq Microcom 610 ISDN Controller. The SoftPaq file to be downloaded is
over 21 MB in size.
Enhancements/Fixes:
- Fixes potential protection fault during Controller installation.
- Allows installation of Microsoft Office and other software while Controller
software is running.
- Fixes problem where Compaq Diagnostics would not work.
- Corrects file transfer errors.
- Fixes blue screen error from Customized Greeting message.
- Corrects errors when an address is changed via address book or dialer.
- Fixes problem where Fax transmission is interrupted on Deskpro 4000.
- Corrects truncated file list in FAX/EFT dialer.
- Fixes problem where the second of two simultaneous messages was not recorded.
- Fixes Connect Gate option.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is an executable with
a filename based on the SoftPaq Number above.
2. From that drive and directory, execute the downloaded file
and follow the on-screen instructions.
3. After the files have been extracted, you may delete the
SoftPaq file downloaded in step 1.
4. Execute the extracted file(SP5885.EXE) and follow the on-screen instructions.
5. Refer to the README_1ST.DOC file in the download directory for the
installation instructions.
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|