PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP5851

SP5851 — Compaq Microcom 610 ISDN Controller Software Update

SoftPaq Number SP5851
Filename SP5851.EXE
Size 21716K
Date 14 March 1998
Version 1.20
Operating System Windows NT 4.0
Products Affected Compaq Microcom 610 ISDN Controller OPERATING SYSTEMS AFFECTED: Microsoft Windows 95, Microsoft Windows NT

  Download SP5851.EXE  


Readme

SOFTPAQ NUMBER:  SP5851
PART NUMBER:  N/A
FILE NAME:  N/A 
TITLE:  Compaq Microcom 610 ISDN Controller Software Update
VERSION:  1.20
LANGUAGE:  English

CATEGORY:  Comm-Network/Drivers

PRODUCTS AFFECTED:  Compaq Microcom 610 ISDN Controller

OPERATING SYSTEMS AFFECTED:  Microsoft Windows 95, 
			     Microsoft Windows NT

SYSTEM CONFIGURATION:  - IBM-compatible Pentium 66-Mhz or greater 
                       - 16 MB system RAM minimum
                       - At least 50 MB free hard disk space
                       - Compaq Microcom 610 ISDN Controller installed 

EFFECTIVE DATE:  14 March 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  v3.1

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to update the support software for 
the Compaq Microcom 610 ISDN Controller.  The SoftPaq file to be downloaded is 
over 21 MB in size.

Enhancements/Fixes:
 - Fixes potential protection fault during Controller installation.
 - Allows installation of Microsoft Office and other software while Controller 
   software is running.
 - Fixes problem where Compaq Diagnostics would not work.
 - Corrects file transfer errors.
 - Fixes blue screen error from Customized Greeting message.
 - Corrects errors when an address is changed via address book or dialer. 
 - Fixes problem where Fax transmission is interrupted on Deskpro 4000.
 - Corrects truncated file list in FAX/EFT dialer.
 - Fixes problem where the second of two simultaneous messages was not recorded.
 - Fixes Connect Gate option.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.

3. After the files have been extracted, you may delete the  
SoftPaq file downloaded in step 1.

4. Execute the extracted file(SP5851.EXE) and follow the on-screen instructions.

5. Refer to the README_1ST.DOC file in the download directory for the 
installation instructions.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home