SOFTPAQ NUMBER:  SP5790
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  UPS Support for Standby Recovery Service for Windows NT
VERSION:  1.03 Rev A
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq Servers supported by the Standby
                    Recovery Server Option

OPERATING SYSTEM:  Microsoft Windows NT 3.51 or greater

SYSTEM CONFIGURATION:  
 - Server with Standby Recovery Server Option installed
 - A Compaq/DelTec UPS which supports Power Load Group Segmentation with 
     Multiserver UPS Option Card

PREREQUISITES:  See SYSTEM CONFIGURATION

EFFECTIVE DATE:  16 March 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP3893

DESCRIPTION:  This SoftPaq unpacks the files required to install 
and configure UPS Support for Standby Recovery Service.  This service is 
used in conjunction with the Standby Recovery Server Option.  It's purpose
is to correct an issue which may occur during a failover to the Standby
Server that can cause a duplicate TCP/IP address and/or a duplicate
Computer Name.

Enhancements/Fixes:
 - This version corrects a problem with Version 1.00 in superseded 
   SoftPaq SP3893, which has been removed from the online services 
   and should not be used.  Version 1.00 incorrectly updates a ROM 
   location on the Multi-Server UPS Option Card, causing the load 
   segment connection ports to be mapped incorrectly, which could 
   cause the UPS to shut off power to a server before Windows NT 
   has properly shut down.  Version 1.03 in this SoftPaq remaps the
   load segment connection ports correctly.

HOW TO USE:

1. Download the SoftPaq to an empty directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

The following files will be extracted:
    UpsRSys.Exe
    Readme.txt
    UpsSetup.exe
    UpsSetup.ini
    UpsCfg.exe
    UpsCfg.cpl
    UPSRSYS.HLP 

4. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

5. Refer to README.TXT for instructions on installing and using the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies