SOFTPAQ NUMBER:  SP5780
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Professional Workstation 6000/8000 ROMPaq Upgrade 
VERSION:  686W2_011398 Rev A
LANGUAGE:  English

CATEGORY:  Workstations/ROMPaqs

PRODUCTS AFFECTED:  Compaq Professional Workstation 6000/8000

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  14 January 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP4647

DESCRIPTION:  Creates the ROMPaq Firmware Upgrade Diskette for the 
Compaq Professional Workstation 6000 and 8000, which allows a user to 
upgrade the System ROM to the 01/13/98 version.

Enhancements/Fixes:
	
 - Adds support for 333-MHz processor, with latest patch for multiple processors.
 - Adds support for the latest Compaq Insight Manager health driver.
 - Revises PCI IRQ routing information for PC95a requirements.
 - Improves microphone recording performance.

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to upgrade the System ROM.

WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING 
THE UPGRADE PROCESS!!!!

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.