| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP5730 — 3COM 3C905B-TX WOL Controller Driver Diskettes v3.01
| SoftPaq Number |
SP5730 |
| Filename |
SP5730.EXE |
| Size |
2121K |
| Date |
19 May 1998 |
| Version |
3.01 Rev A |
| Operating System |
Microsoft Windows 9x, Windows NT 3.51, 4.0, Microsoft Windows For Workgroups, DOS, OS/2 |
| Products Affected |
Deskpro EP Series, Deskpro SB Series, Deskpro EN Series |
| Supersedes |
NONE |
Readme
SOFTPAQ NUMBER: SP5730
PART NUMBER: 276784-001
FILE NAME: N/A
TITLE: 3COM 3C905B-TX WOL Controller Driver Diskettes v3.01
VERSION: 3.01 Rev A
LANGUAGE: US English
CATEGORY: Drivers
DIVISION: Desktops
PRODUCTS AFFECTED: Deskpro EP Series, Deskpro SB Series, Deskpro EN Series
OPERATING SYSTEM: Microsoft Windows 9x,
Microsoft Windows NT 3.51, 4.0,
Microsoft Windows For Workgroups,
MS-DOS,
IBM OS/2
SYSTEM CONFIGURATION: A 3C905B-TX WOL Network Controller installed
PREREQUISITES: N/A
EFFECTIVE DATE: 19 May 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 3.1
SUPERSEDES: NONE
DESCRIPTION:
Unpacks the files necessary to install a common set of EtherDisk XL drivers
that support the 3Com family of bus-mastering PCI Network Interface
Controllers. Products supported include:
- 3C905B-TX WOL NETWORK CONTROLLER
ENHANCEMENTS/FIXES: N/A
These are the same versions of these drivers that were originally installed
on the affected products. They are not upgrades. They are offered here as
a convenience to customers who may need to restore them to their computer for
any reason.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the Softpaq number above.
2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the download directory. All files are unpacked into this
folder.
3. After the files have been unpacked, you may delete the
self-extracting file downloaded in step 1.
4. To install, run HELP.EXE. For example, enter:
<path>\HELP
where <path> is the drive and directory created in step 2
- or -
a diskette drive letter if using the optional installation diskettes
Follow the on-screen instructions.
5. After the installation is completed, you may delete the directory
created in step 2 if you wish.
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|