SOFTPAQ NUMBER: SP5687 
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  ATI Rage Video Drivers for Windows NT 3.51
VERSION:  5.10B11 Rev C
LANGUAGE:  English

CATEGORY:  Drivers 

DIVISION:  Desktops

PRODUCTS AFFECTED: Compaq Deskpro EN, Deskpro EP, and Deskpro SB Series 
                   with an ATI Rage Pro Turbo 1x or 2x or Rage IIC Graphics 
                   Controller 
             NOTE: To determine if your model has this controller --
                   In Windows NT, go to the Control Panel, then select 
                   Display, Settings, Display type.

OPERATING SYSTEM:  Microsoft Windows NT 3.51

SYSTEM CONFIGURATION:  ATI Rage Pro Turbo 1x/2x or Rage IIC Graphics Controller

PREREQUISITES:  N/A

EFFECTIVE DATE:  May 19, 1998 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to install the Windows NT 3.51 driver 
for the ATI Rage Pro Turbo 1x or 2x or Rage IIC Graphics Controller used in 
certain Deskpro EN, Deskpro EP, and Deskpro SB Series models (see NOTE above).  
Optionally allows an installation diskette to be created.  

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or an installation diskette can be created. To create an installation
diskette, run MAKEDISK.BAT.
To install the driver, go to the Control Panel and select:

   Display/Settings/Display Type

Verify that the Adapter Type is one of the ones listed above.
If it is not, then cancel and exit.
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2.

5. Select OK to install the driver.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies