SOFTPAQ NUMBER:  SP5679
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro ATI Rage Video Drivers for Windows 3.1 
VERSION:  5.00 Rev C
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Desktops

PRODUCTS AFFECTED: Compaq Deskpro EN, Deskpro EP, and Deskpro SB models with 
                   one of the ATI Rage Graphics Controllers listed below 

OPERATING SYSTEM:  Microsoft Windows 3.1

SYSTEM CONFIGURATION:  ATI Rage Pro Turbo 1x or 2x Graphics Controller
                       ATI Rage IIC Graphics Controller

PREREQUISITES:  N/A

EFFECTIVE DATE:  April 15, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to install the Windows NT 3.1 video 
drivers for any of the ATI Rage Graphics Controllers listed above, which are used in 
certain models of the Deskpro EN, Deskpro EP, and Deskpro SB Series.  
Optionally allows two installation diskettes to be created.  

This is the initial version of this software.  It is not an update.  It is offered 
here as a convenience to customers who may need to restore the driver to their computer 
for any reason.

HOW TO USE:

1. Download the SoftPaq to a temporary, EMPTY directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into subdirectories named 
Disk_01 and Disk_02 that are created under the download directory or the 
directory specified.  

3. After the folders Disk_01 and Disk_02 have been created, 
you may delete the self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or two installation diskettes can be created.  
To create installation diskettes, run MAKEDISK.BAT.

To install the driver, run the downloaded file INSTALL.EXE.  
For example, from Windows Program Manager select File, Run,
then enter the full path to INSTALL.EXE:

   c:\<path>\disk_01\install

   where <path> is the drive and directory chosen in step 2

Or if installing from the first created diskette, enter:

   a:\install 

Follow the on-screen instructions to complete the installation.

5. When the installation is complete, close Windows and restart Windows
for the new driver to take effect.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.
Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.