SOFTPAQ NUMBER:  SP5678
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro ATI Rage Video Drivers for OS/2 
VERSION:  5.00B3 Rev A
LANGUAGE:  English

CATEGORY:  Driver

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  Compaq Deskpro EN, Deskpro EP, and Deskpro SB Series models 
                    with an ATI Rage Pro Turbo 1x or 2x or Rage IIC Graphics 
                    Controller
NOTE:  To determine whether your unit has a video controller supported by this 
       driver, go to the OS/2 System, click on System Setup and then Display 
       Driver Install.  Verify that one of the supported ATI Controllers 
       appears next to the Primary Display check box. 

OPERATING SYSTEM:  IBM OS/2

SYSTEM CONFIGURATION:  ATI Rage Pro Turbo 1x/2x or Rage IIC Graphics Controller

PREREQUISITES:  N/A

EFFECTIVE DATE:  March 19, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1
 
SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to install the IBM OS/2 video 
driver for the ATI Rage Pro Turbo 1x or 2x or Rage IIC Graphics Controller
used in certain Deskpro EN, Deskpro EP, and Deskpro SB Series models 
(see NOTE above).  Optionally allows two installation diskettes to be created.  

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into subdirectories named 
Disk_01 and Disk_02 that are created under the download directory or the 
directory specified.  

3. After the folders Disk_01 and Disk_02 have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or two installation diskettes can be created.  
To create installation diskettes, run MAKEDISK.BAT.

To install the driver from the hard drive, do the following:
Open an OS/2 full-screen or OS/2 window session.
At the OS/2 command prompt, enter the full path to OS2INST.EXE:

   c:\<path>\disk_01\OS2INST.exe

   where <path> is the drive and directory chosen in step 2

Or if installing from optional diskettes, insert diskette #1 and enter:

   a:\OS2INST

When the MAIN menu displays, select Driver Installation, Install Enhanced driver. 
Enter the following path when prompted:
   c:\<path>\disk_02\PM

Or if installing from optional diskettes, insert diskette #2.

Follow the on-screen instructions.

5. When the installation is complete, shut down and restart the computer for 
the changes to take effect.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies