SOFTPAQ NUMBER:  SP5658
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Notebook Windows 3.x Video Driver 
VERSION:  1.3.9 Rev A
LANGUAGE:  US English

CATEGORY:  Drivers

DIVISIONS:  Portables
            Consumers

PRODUCTS AFFECTED: Compaq Armada 1540 and 1590
		   Compaq Armada 1560 and 1592 
                   Compaq Presario 1710SB
		   Compaq Armada 1570/1571/1572/1573/1598
		   Compaq Armada SB 5200/32/3.2/D
		   Compaq Armada SB 5200/32/3.2/DM
		   Compaq Armada SB 5233/32/4.0/DT
		   Compaq Armada SB 5233/32/4.0/DMT
		   Compaq Armada SB 5233/S/2100/D/0/1
		   Compaq Armada SB 5233/S/3200/D/M/2
		   Compaq Armada SB 6233/T/3200/D/0/1
		   Compaq Armada SB 6233/T/3200/D/M/2
		   Compaq Armada 1700 6266/T/4000/D/M/1
		   Compaq Armada 1700 6266/T/4000/D/0/1
		   Compaq Armada 1700 6233/T/4000/D/M/1
		   Compaq Armada 1700 6233/T/4000/D/M/2
		   Compaq Armada 1700 6233/T/4000/D/0/1
		   Compaq Armada 1700 6233/T/4000/D/0/2

OPERATING SYSTEM:  Microsoft Windows 3.x

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  12 January 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP4597

DESCRIPTION:  Unpacks files needed to install the Chips & Technologies
video driver for Windows 3.x for the Armada and Presario notebook models 
mentioned above.  Optionally creates an installation diskette.   

Enhancements/Fixes:  This softpaq resolves the following issues.
- DOS display losing sync under NTSC-TV.
- Inability to change color or resolution when display is on TV.
- Losing mouse cursor when Windows is started with POPUP active.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the optional installation diskette, run MAKEDISK.BAT and 
follow on-screen instructions.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\setup
   where <path> is the drive and directory created in step 2
                      - or -
                   a diskette drive letter if using the optional 
                   installation diskette 

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1997, 1998, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies