SOFTPAQ NUMBER:  SP5443
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq PC Card Support for Windows NT 4.0 
VERSION:  2.10 Rev A
LANGUAGE:  US English

CATEGORY:  Drivers 

DIVISIONS:  Portables
            Consumer

PRODUCTS AFFECTED: Compaq Armada 1500 Series
		   Compaq Armada 4100 Series
                   Compaq Armada 4200 Series
		   Compaq Armada 7300 Series
		   Compaq Armada 7700 Series
		   Compaq LTE 5000 Series
                   Compaq Presario 1710SB
		   Compaq Armada 1570/1571/1572/1573/1598
		   Compaq Armada SB 5200/32/3.2/D
		   Compaq Armada SB 5200/32/3.2/DM
		   Compaq Armada SB 5233/32/4.0/DT
		   Compaq Armada SB 5233/32/4.0/DMT

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  
 - System Firmware Dependencies
	Compaq Armada 1500 Series -- 09/18/97 or later
	Compaq Armada 1570/1571/1572/1573/1598 -- 09/18/97 or later
	Compaq Armada SB 5200/32/3.2/D -- 09/18/97 or later
	Compaq Armada SB 5200/32/3.2/DM -- 09/18/97 or later
	Compaq Armada SB 5233/32/4.0/DT -- 09/18/97 or later
	Compaq Armada SB 5233/32/4.0/DMT -- 09/18/97 or later
	Compaq Armada 4100 Series -- 08/01/97 or later
	Compaq Armada 4200 Series -- 09/12/97 or later
	Compaq Armada 7300 Series -- 07/06/97 or later
	Compaq Armada 7700 Series -- 09/15/97 or later
	Compaq LTE 5000 Series -- Version 7.02 or later
	Compaq Presario 1710SB -- 09/18/97 or later
 - Software Dependencies
	Compaq LTE 5000 Series -- NT 4.0 Supplemental Programs Disk 
				    Version 1.10 Rev C or later
	All other supported products -- NT 4.0 Supplemental Programs Disk
				   	 Version 2.10 Rev A (or later) 
				     or Power Conservation for NT 4.0
					 Version 2.20 Rev A

EFFECTIVE DATE:  12 January 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP4898

DESCRIPTION:  Unpacks files needed to install Compaq PC Card Support
for Windows NT 4.0 for the specific Armada and Presario models mentioned 
above.  Optionally creates three installation diskettes.  

ENHANCEMENTS:  The following list includes the enhanced features supported
 in Version 2.10 Rev A that are beyond Version 2.08 Rev A.
- Hot swapping Zoomed Video PC Cards
- Hot swapping Multi-Function PC Cards
- Hot swapping Combo PC Cards (only if LAN function is NOT loaded)
- 5.0 and 3.3 volt PC Cards (not supported on Armada 4100 and LTE 5000 Series)
- Cold, Warm, and Hot Docking with multiple (dis)similar controllers
- CardBus PC Cards with device details listed above
- Socket Power Management (Socket Off on-demand)
- PnP Configuration Methodology

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3.  After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. The application may be installed directly from the unpacked files,
or three (3) diskettes can be created.  To create the diskettes, run 
MAKEDISK.BAT.  

To install, first boot the system with no PC Cards in PCMCIA slots.
Then run SETUP.EXE, as follows:

Select Start on the Windows NT Task Bar, select Run, then enter:

     <path>\setup

     where <path> is the drive and directory from step 2
                  or a diskette drive letter if installing from diskette

Follow the CardWare installation and setup prompts.

5. After the installation is completed, you may delete the files created
in step 2.

Copyright 1997, 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies