PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP5410

SP5410 — Armada 4200 IM Agents for Windows 95 and NT 4.0

SoftPaq Number SP5410
Filename SP5410.EXE
Size 2565K
Date 12 January 1998
Version 3.20 Rev F
Operating System Windows 95, Windows NT 4.0
Products Affected Compaq Armada 4200 Series

  Download SP5410.EXE  


Readme

SOFTPAQ NUMBER:  SP5410
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Armada 4200 IM Agents for Windows 95 and NT 4.0 
VERSION:  3.20 Rev F
LANGUAGE:  Dutch

CATEGORY:  Portables/Software Solutions

PRODUCTS AFFECTED:  Compaq Armada 4200 Series

OPERATING SYSTEM:  Microsoft Windows 95, 
                   Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  12 January 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to install Compaq Insight 
Management Agents for Microsoft Windows 95 and Windows NT 4.0 
for use with Armada 4200 Series notebooks.  

This product provides local alerting and SNMP agents 
for Compaq Portable Computers supporting Intelligent 
Manageability.  Local alerting notifies the user if 
the system temperature has exceeded normal operating 
conditions or an imminent drive failure has been detected.  
SNMP agents allow the system to be managed by SNMP-compliant
Management applications such as Compaq Insight Manager. 

Optionally creates two installation diskettes.

This is the first version of CIM Agents specifically for the Armada 4200 
Series.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3.  After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4.  The application may be installed directly from the unpacked files,
or two diskettes can be created.  To create the diskettes, run MAKEDISK. BAT.

To install, run SETUP.EXE.  For example, select Start, Run, and then enter:

  <path>\setup

  where <path> is the drive and directory from step two
               or a diskette drive letter if installing from optional diskettes

5. After the installation is completed, you may delete the files created in
step 2.

Copyright 1997, 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home