PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP5380

SP5380 — MVP Workstation Graphics Drivers for Windows NT 4.0

SoftPaq Number SP5380
Filename SP5380.EXE
Size 867K
Date 3 February 1998
Version 1.23 Rev A
Operating System Windows NT 4.0
Products Affected Compaq Professional Workstation 5100 using the MVP Workstation Graphics Controller NOTE: The MVP Workstation Graphics Controller is standard equipment on selected Professional Workstation 5100 models only, but could be an option installed on other models.
Supersedes SP5372

  Download SP5380.EXE  


Readme

SOFTPAQ NUMBER:  SP5380
PART NUMBER:  276114-006
FILE NAME:  N/A
TITLE:  MVP Workstation Graphics Drivers for Windows NT 4.0
VERSION:  1.23 Rev A
LANGUAGE:  English

CATEGORY:  Workstations/Drivers

PRODUCTS AFFECTED:  Compaq Professional Workstation 5100 using the MVP 
Workstation Graphics Controller
NOTE:  The MVP Workstation Graphics Controller is standard equipment on 
selected Professional Workstation 5100 models only, but could be an option 
installed on other models.

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  MVP Workstation Graphics Controller

EFFECTIVE DATE:  3 February 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP5372

DESCRIPTION:  Creates the driver diskette, "Workstation MVP Workstation Support 
for Windows NT 4.0," containing NT 4.0 video drivers for the MVP Workstation 
Graphics Controller for the above-mentioned Compaq Professional Workstations.
The disk also contains Mediator, special software that manages up to four 
monitors, which can all be supported on a single MVP Workstation Graphics 
Controller.

ENHANCEMENTS/FIXES:  
  - Fixes a problem that prevented the MVP Workstation Graphics Controller 
    from operating properly in Workstation 6000 or 8000 models.  
  - Fixes a problem with AutoCAD R14 where it left artifacts on the left and right 
    of a second monitor when moving objects.

HOW TO USE:

1.  Obtain 1 formatted 1.44-MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions.  You will be prompted to insert the formatted diskette 
in a drive to create the diskette.

4.  After the diskette has been created, you may delete the SoftPaq file 
downloaded in step 2.

5.  To install, see README.TXT on the created diskette.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home