SOFTPAQ NUMBER:  SP5132
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Fix CIM Health Agent for SCO to Identify ProLiant Memory Errors 
VERSION:  3.40
LANGUAGE:  English
CATEGORY:  Systems/Software Solutions

PRODUCTS AFFECTED:  
           The following servers running SCO OpenServer Release 5:
                  Compaq ProLiant 1200
                  Compaq ProLiant 1600
                  Compaq ProLiant 2500 with Integrated Management Log
                  Compaq ProLiant 2500R
                  Compaq ProLiant 3000
                  Compaq ProLiant 5500
                  Compaq ProLiant 6000
                  Compaq ProLiant 6500
                  Compaq ProLiant 7000

           The following servers running SCO Open Server 3.0:
                  Compaq ProLiant 2500 with Integrated Management Log

OPERATING SYSTEM:  SCO OpenServer Release 5 or
                   SCO OpenServer 3.0

SYSTEM CONFIGURATION:  Compaq Insight Management Agents Version 3.40
                           for SCO OpenServer Release 5 
                          - or -
                       Compaq Insight Management Agents Version 3.40
                           for SCO OpenServer 3.0

EFFECTIVE DATE:  01 December 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.1

SUPERSEDES:  N/A

DESCRIPTION:  Creates a diskette containing a fix for the following problem.
If ECC memory errors exceed the threshold on Compaq ProLiant servers 
equipped with Integrated Management Log (IML), the error message 
"Replace Corr Memory Module" is not delivered by the Compaq Insight 
Management Health Agent as it should be.

Applying the fix on this diskette modifies the Compaq Insight Management Health 
Agent so that the message is delivered to the trap destinations specified in the 
file /etc/snmpd.trap.  When running Compaq Insight Manager, the message is 
displayed in the alarm log window.

HOW TO USE:

Steps 1-4 are performed under DOS, Microsoft Windows 3.1, or Windows NT.
Steps 5-7 are performed under SCO OpenServer Release 5 or SCO Open
Server 3.0.

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
   to that directory.  The file that is downloaded is an executable with 
   a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
   and follow the on-screen instructions.  You will be prompted to 
   insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
   SoftPaq file downloaded in step 2.

5. To install the Compaq Insight Management Health Agent for SCO OpenServer 
   Release 5 or SCO Open Server 3.0, log in as "root".

6. Insert the newly created diskette into the SCO default diskette
   drive and execute the following commands:

       mkdir /tmp/sp5132
       cd /tmp/sp5132
       doscp a:/SP5132.TAR sp5132.tar
       tar xvf sp5132.tar
       sh ./sp5132.sh
       (Dispalys "sp5132.sh: completed successfully!" at end.)
       cd /
       rm -rf /tmp/sp5132

7.  Remove the diskette.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies