| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP5128 — Workstation GLoria-L/GLoria-XL PowerDraft Accelerator for AutoCAD R13
| SoftPaq Number |
SP5128 |
| Filename |
SP5128.EXE |
| Size |
2126K |
| Date |
30 October 1997 |
| Version |
2.01 Rev C |
| Operating System |
Windows NT 3.51, Windows NT 4.0 |
| Products Affected |
Compaq Professional Workstation 5000, 5100, 6000, or 8000 using the GLoria-L or GLoria-XL 3D Graphics Controller NOTE: These graphics controllers are standard equipment on selected Workstation models only, but could be an option installed on other models. The models that include the Gloria-L as standard equipment include: - Professional Workstation 5000 with serial number containing BJS6 or BJT2 - Professional Workstation 6000 with serial number containing BNS3 The current model that includes the Gloria-LX as standard equipment is: - Professional Workstation 5100 with serial number containing BRQ7 |
Readme
SOFTPAQ NUMBER: SP5128
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Workstation GLoria-L/GLoria-XL PowerDraft Accelerator for AutoCAD R13
VERSION: 2.01 Rev C
LANGUAGE: Japanese
CATEGORY: Workstations/Drivers
PRODUCTS AFFECTED: Compaq Professional Workstation 5000, 5100, 6000, or 8000
using the GLoria-L or GLoria-XL 3D Graphics Controller
NOTE: These graphics controllers are standard equipment on selected
Workstation models only, but could be an option installed on other models.
The models that include the Gloria-L as standard equipment include:
- Professional Workstation 5000 with serial number containing BJS6 or BJT2
- Professional Workstation 6000 with serial number containing BNS3
The current model that includes the Gloria-LX as standard equipment is:
- Professional Workstation 5100 with serial number containing BRQ7
OPERATING SYSTEM: Microsoft Windows NT 3.51, Microsoft Windows NT 4.0
SYSTEM CONFIGURATION: GLoria-L or Gloria-XL 3D Graphics Controller
EFFECTIVE DATE: 30 October 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.X
SUPERSEDES: N/A
DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run in
United States mode. Creates the 2-diskette set, "Workstation
GLoria-L/GLoria-XL PowerDraft Accelerator for AutoCAD R13."
HOW TO USE:
1. Obtain 2 formatted 1.44-MB diskettes.
2. Download the SoftPaq to a directory on your hard drive and change to
that directory. The file that is downloaded is an executable with a
filename based on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file and follow
the on-screen instructions. You will be prompted to insert the formatted
diskettes in a drive to create the diskettes.
4. After the diskettes have been created, you may delete the SoftPaq file
downloaded in step 2.
5. To Install, see A:\README.TXT on the created diskette.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|