SOFTPAQ NUMBER:  SP5110
PART NUMBER:  275709-006
FILE NAME:  N/A
TITLE:  ROMPaq for ProSignia and SystemPro/XL 
VERSION:  3.15 Rev A
LANGUAGE:  English

CATEGORY:  Systems/ROMPaqs

PRODUCTS AFFECTED: Compaq Systempro/XL
                   Compaq ProSignia
                   Compaq ProSignia VS
                   Compaq ProSignia 300
                   Compaq ProSignia 500
                   Compaq ProSignia 200

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  7 October 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP4421

DESCRIPTION:  Creates the Systems ROMPaq Firmware Upgrade Diskette 
for Compaq SystemPro/XL and Compaq ProSignia Servers.  This version 
provides updated system ROM images for all of the supported servers.  

Systempro/XL - ROM 386E4 (09/25/1997):
=====================================
    Start a new line after "1783 Drive Array Controller Failure" message.

ProSignia - ROM 386E5 (09/25/1997):
==================================
    ROMPaq now displays ROM version year information in 4-digit notation.

ProSignia - ROM E8 (09/25/1997):
===============================
    Fixed intermitent problem with keyboard lockup at the F1 prompt.

ProSignia VS - ROM E11 (09/25/1997):
===================================
    Fixed intermitent problem with keyboard lockup at the F1 prompt.

ProSignia 300/500 - ROM E15 (09/25/1997):
========================================
    Added support for multiport Compaq Dual Channel Wide-Ultra SCSI-3 Controllers.

    Fixed problem with system hanging when running in high resolution video
    modes during a warm boot with a PCI bus reset for Cirrus video cards.
	
ProSignia 200 - ROM P01 (09/25/1997):
====================================
    Added support for multiport Compaq Dual Channel Wide-Ultra SCSI-3 Controllers.

    Added INT13 BIOS extensions for IDE hard drives to support the new larger 
    capacity drives.

    Fixed problem with system hanging when running in high resolution video
    modes during a warm boot with a PCI bus reset for Cirrus video cards.

ProSignia 200 - ROM P05 (09/25/1997):
====================================
    Added support for multiport Compaq Dual Channel Wide-Ultra SCSI-3 Controllers.

    Added support for Pentium II C.1 Step Processor.

    Added INT13 BIOS extensions for IDE hard drives to support the new larger 
        capacity drives.

    Fixed problem with system hanging when running in high resolution video 
	modes during a warm boot with a PCI bus reset for Cirrus video cards.

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Refer to the README file(s) on the diskette for specific upgrade 
instructions and additional help.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies