SOFTPAQ NUMBER:  SP5009
PART NUMBER:  N/A
FILE NAME:  CPQDISP.DRV
TITLE:  Deskpro Windows 95 Graphics Drivers
VERSION:  1.92 Rev A
LANGUAGE:  English

CATEGORY:  Desktops/Drivers

PRODUCTS AFFECTED:  
Deskpro 4000 5233MMX, 5200MMX, 5166MMX, 6233, 6200, 6180, 5200, 5166, 5133, 5120, 5100
Deskpro 2000 5233MMX, 5200MMX, 5166MMX, 6200, 6180, 5200, 5166, 5133, 5120, 5100
Deskpro XL 6200, 6150, 5133, 5120, 5100, 590, 575, 566, 560, 466, 450
Deskpro 5166, 5150, 5133, 5120, 5100, 590, 575, 4100, 466, 450
Deskpro 486/25, 486/33L, 486/50L, 386/33L, 386/33, 386/25e
Prolinea 5166, 5150, 5133, 5120, 5100, 4100, 590, 575, 466, 450
Prolinea 5120e, 5100e, 575e
All Deskpro I units
All Deskpro XE units
All Deskpro M units

OPERATING SYSTEM:  Microsoft Windows 95

SYSTEM CONFIGURATION:  Compaq S3 V2/GX, ViRGE/GX, CL5434, CL5436, 
CL5446, QVision 1024 I/E, or QVision 1280 I/E/P/P+ Graphics Controller

EFFECTIVE DATE:  October 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP4066 

DESCRIPTION:  This SoftPaq unpacks the files required to install the 
Windows 95 video driver for the above-mentioned Deskpro and ProLinea models. 
Driver support is included for Compaq S3 V2/GX, ViRGE/GX, CL5434, CL5436, 
CL5446, QVision 1024 I/E, and QVision 1280 I/E/P/P+ Graphics Controllers. 
Optionally allows a driver diskette to be created. 

This driver corrects the following issues with various graphics controllers:

- Added S3 ViRGE/GX 75Hz and 85Hz refresh rates for 1280x1024, 16bpp mode.
- Fixed size of COMPAQ tab page to avoid changing size of Display-Properties page.
- Removed 640x400, 32bpp desktop mode.
- Corrected Attachmate Extra Personal Client Asynch. connection lockup issue.
- Reduced transition time from DOS Window to DOS Full Screen toggle.
- Corrected occasional S3 ViRGE/GX problem where ALT+ESC/TAB/ENTER keystrokes
  did not work from full screen dos session when DirectDraw overlay was on.


HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or a driver diskette can be created. To create a driver diskette,
run MAKEDISK.BAT. To install the driver, go to the Control Panel and select:

   Display/Settings/Change Display Type

Verify that the Adapter Type is one of the controllers listed in
the System Configuration section above.
If it is not, then Cancel and Exit.
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2 or the diskette.

5. Select OK to install the driver.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies