PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP4963

SP4963 — Deskpro 2000 S3 Display Support for OS/2 VERSION 3.03 Rev B

SoftPaq Number SP4963
Filename SP4963.EXE
Size 1583K
Date 21 October 97
Version N/A
Operating System All

  Download SP4963.EXE  


Readme

SOFTPAQ NUMBER:  SP4963
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro 2000 S3 Display Support for OS/2
VERSION:  3.03 Rev B
LANGUAGE:  English

CATEGORY:  Desktops/Driver

PRODUCTS AFFECTED:  Deskpro 2000 Series with the Compaq S3 V2/GX 
                    graphics controller. 
                    
OPERATING SYSTEM:  IBM OS/2

SYSTEM CONFIGURATION:  Compaq S3 V2/GX video graphics controller

EFFECTIVE DATE: 13 October 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP3839

DESCRIPTION:  This SoftPaq unpacks the files required to install 
the video driver for IBM OS/2 for the Compaq S3 V2/GX 
controller used in certain Deskpro 2000 models.
Optionally allows a driver diskette to be created.

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or driver diskette can be created. To create a driver diskette,
run MAKEDISK.BAT.

To install the driver, run SETUP.CMD.  From an OS/2 full-screen or OS/2 window 
session, enter:

     <path>\disk01\setup
     	where <path> is the drive and directory chosen in step 2

      or 

     A:\setup
        if installing from diskette

Follow on-screen instructions and select VGA mode.

5. When the installation is complete, shut down and restart the computer for 
the changes to take effect.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home