SOFTPAQ NUMBER:  SP4793
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Presario 1600/1200 (Limited Models) Keyboard Controller Firmware Update 
VERSION:  0.57 Rev A
LANGUAGE:  English

CATEGORY:  Consumer/Software Solutions

PRODUCTS AFFECTED:  Only Compaq Presario 1207, 1210, 1610, 1615, 1620, 1680, 
                    and 1682 
          CAUTION:  Applying this ROMPaq to any other models may render
                    the computer inoperable.

OPERATING SYSTEM:  Microsoft Windows 95

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  23 September 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP4479, SP4145, SP4038

DESCRIPTION:  Creates a diskette to upgrade the keyboard/battery 
controller firmware on Presario 1207, 1210, 1610, 1615, 1620, 1680, 
and 1682 models only.

This upgrade changes the power-on sequencing when going from DisqPlay mode 
to the ON state.  DisqPlay mode allows a user to play a music CD without opening 
the notebook and with a minimum of power consumption.  This change prevents 
the small probability of the system failing to power up on the first attempt.

This upgrade includes the fix from firmware version 0.55, which corrects a 
problem, explained below, that occasionally caused the system to lock up when 
IDLE mode was turned ON in F10 setup.

 Problem:

 With IDLE mode turned ON, the processor stops each time the operating
 system determines it can go idle to conserve power.  The problem was that
 the IDLE call was sometimes made in the middle of a request to the Keyboard
 Controller for battery gauge information.  The Keyboard Controller would
 timout and abort the operation before the processor started again to 
 finish the command.

 Fix:

 The length of time before a timeout occurs was increased for requests 
 to the Keyboard Controller.

HOW TO USE:

1.  Obtain a formatted 1.44-MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change
    to that directory.  The file that is downloaded is an executable with
    a filename based on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file
    and follow the on-screen instructions.  You will be prompted to
    insert the formatted diskette in a drive to create the diskette.

4.  After the diskette has been created, you may delete the
    SoftPaq file downloaded in step 2.

5.  Turn off the computer.

6.  Make sure that the AC adapter is plugged in and that the AC adapter
    icon is displayed on the status display.

7.  Insert the created diskette and turn the computer on.

8.  The computer boots from the diskette and a batch file applies the update.
    Follow the on-screen prompts.

9.  After the update has finished, the computer will turn itself off.
    Remove the diskette and turn the computer on again.  The updated 
    firmware will be in effect.

  Copyright 1997, Compaq Computer Corporation.  All rights reserved.
  
  Product names mentioned herein may be trademarks and/or registered
  trademarks of their respective companies