| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP4694 — ROMPaq for Deskpro 2000 (686M ROM)
| SoftPaq Number |
SP4694 |
| Filename |
SP4694.EXE |
| Size |
378K |
| Date |
December 10, 1997 |
| Version |
686M_111897 |
| Operating System |
All |
| Products Affected |
Deskpro 2000 models with a 686M Family ROM NOTE: Run F10 Setup to determine the ROM Family and ROM date. |
| Supersedes |
SP4667 |
Readme
SOFTPAQ NUMBER: SP4694
PART NUMBER: 270894-003
FILE NAME: N/A
TITLE: ROMPaq for Deskpro 2000 (686M ROM)
VERSION: 686M_111897
LANGUAGE: English
CATEGORY: Desktops/ROMPaqs
PRODUCTS AFFECTED: Deskpro 2000 models with a 686M Family ROM
NOTE: Run F10 Setup to determine the ROM Family and ROM date.
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: December 10, 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.X
SUPERSEDES: SP4667
DESCRIPTION: This creates a ROMPaq firmware upgrade diskette to
upgrade the System ROM to the 11/18/97 version in Deskpro 2000 models
with a 686M Family ROM. The ROM Family and ROM date can be determined
by running F10 Setup.
Enhancements/Fixes in this version:
- Fixes a problem where the F10/F12 prompt was disappearing
in less than one second on systems with two IDE Hard Drives.
Added an extra one second delay for this configuration and the
configuration with two drives on the primary and two drives on
the secondary controller.
- Fixes a problem where the system would not boot when a LanStreamer
network card was present.
HOW TO USE:
1. Obtain a formatted 1.44-MB diskette.
2. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is an executable with
a filename based on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file
and follow the on-screen instructions. You will be prompted to
insert the formatted diskette in a drive to create the diskette.
4. After the diskette has been created, you may delete the
SoftPaq file downloaded in step 2.
5. Keeping the newly created diskette in the A: drive, cycle
system power to boot from the ROMPaq diskette.
6. Follow the on-screen instructions to select the 11/18/97
Compaq System ROM and upgrade the firmware.
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|