| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP4692 — ROM Image for Deskpro 4000 and 6000 Remote ROM Flash (686V ROM)
| SoftPaq Number |
SP4692 |
| Filename |
SP4692.EXE |
| Size |
249K |
| Date |
January 06, 1998 |
| Version |
686V_121797 |
| Operating System |
All |
| Products Affected |
Deskpro 4000 and 6000 models with a 686V Family ROM NOTE: Run F10 Setup to determine the ROM Family and ROM date. |
| Supersedes |
SP4670 |
Readme
SOFTPAQ NUMBER: SP4692
PART NUMBER: N/A
FILE NAME: 686V.CAB
TITLE: ROM Image for Deskpro 4000 and 6000 Remote ROM Flash (686V ROM)
VERSION: 686V_121797
LANGUAGE: English
CATEGORY: Desktops/ROMPaqs
PRODUCTS AFFECTED: Deskpro 4000 and 6000 models with a 686V Family ROM
NOTE: Run F10 Setup to determine the ROM Family and ROM date.
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: January 06, 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 3.X
PREREQUISITE: Remote Management Setup
SUPERSEDES: SP4670
DESCRIPTION: Creates a cabinet file that contains a binary image
for the 12/17/97 version System ROM in Deskpro 4000 and 6000 models
with a 686V Family ROM. The ROM Family and ROM date can be
determined by running F10 Setup.
Enhancements/Fixes in this version:
- Enables the optional Ultra SCSI hard drive to be chosen as the default
hard drive upon system start-up.
- Fixes a problem where the F10/F12 prompt was disappearing
in less than 1 second on systems with two IDE Hard Drives.
Added an extra 1 second delay for this configuration and the
configuration with two drives on the primary and two drives on
the secondary controller.
- Fixes a problem where the system would not boot when a LanStreamer
network card was present.
- Added Net PC compliant (PXE) remote network boot support to enable
Remote System Installation.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates the file 686V.CAB.
3. After the file has been created, you may delete the
self-extracting file downloaded in step 1.
4. Refer to the Remote Management Setup documentation for
instructions on creating a Remote ROM Flash job to flash the ROM
on target PCs on the network.
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|