SOFTPAQ NUMBER:  SP4691
PART NUMBER:  270891-006
FILE NAME:  N/A
TITLE:  ROMPaq for Deskpro 4000 and 6000 (686V ROM)
VERSION:  686V_121797
LANGUAGE:  English

CATEGORY:  Desktops/ROMPaqs 

PRODUCTS AFFECTED:  Deskpro 4000 and 6000 models with a 686V Family ROM 
             NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A 

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  January 06, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP4669

DESCRIPTION:  This creates a ROMPaq firmware upgrade diskette to 
upgrade the System ROM to the 12/17/97 version for Deskpro 4000 
and 6000 models with a 686V Family ROM.  The ROM Family and ROM 
date can be determined by running F10 Setup.  

Enhancements/Fixes in this version:

 - Enables the optional Ultra SCSI hard drive to be chosen as the default 
   hard drive upon system start-up.

 - Fixes a problem where the F10/F12 prompt was disappearing 	
   in less than 1 second on systems with two IDE Hard Drives. 
   Added an extra 1 second delay for this configuration and the 
   configuration with two drives on the primary and two drives on 
   the secondary controller. 

 - Fixes a problem where the system would not boot when a LanStreamer
   network card was present.

 - Added Net PC compliant (PXE) remote network boot support to enable 
   Remote System Installation.

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to select the 12/17/97 
Compaq System ROM and upgrade the firmware.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.