PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP4685

SP4685 — ROM Image for Deskpro 4000 Remote ROM Flash (586V ROM)

SoftPaq Number SP4685
Filename SP4685.EXE
Size 227K
Date January 06, 1998
Version 586V_122397
Operating System All
Products Affected Deskpro 4000 models with a 586V Family ROM NOTE: Run F10 Setup to determine the ROM Family and ROM date.
Supersedes SP4690

  Download SP4685.EXE  


Readme

SOFTPAQ NUMBER:  SP4685
PART NUMBER:  N/A
FILE NAME:  586V.CAB
TITLE:  ROM Image for Deskpro 4000 Remote ROM Flash (586V ROM)
VERSION:  586V_122397
LANGUAGE:  English

CATEGORY:  Desktops/ROMPaqs

PRODUCTS AFFECTED:  Deskpro 4000 models with a 586V Family ROM 
             NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  January 06, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.X

PREREQUISITE:  Remote Management Setup

SUPERSEDES:  SP4690

DESCRIPTION:  Creates a cabinet file that contains a binary image
for the 12/23/97 version System ROM in Deskpro 4000 models 
with a 586V Family ROM.  The ROM Family and ROM date can be
determined by running F10 Setup.

Enhancements/Fixes in this version:

 - Enables the optional Ultra SCSI hard drive to be chosen as the default 
   hard drive upon system start-up.

 - Fixes a problem where the F10/F12 prompt was disappearing 	
   in less than 1 second on systems with two IDE Hard Drives. 
   Added an extra 1 second delay for this configuration and the 
   configuration with two drives on the primary and two drives on 
   the secondary controller. 

 - Fixes a problem where the system would not boot when a LanStreamer
   network card was present.

 - Added Net PC compliant (PXE) remote network boot support to enable 
   Remote System Installation.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
This creates the file 586V.CAB.

3. After the file has been created, you may delete the  
self-extracting file downloaded in step 1.

4. Refer to the Remote Management Setup documentation for 
instructions on creating a Remote ROM Flash job to flash the ROM 
on target PCs on the network.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home