PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP4683

SP4683 — LCM ROM Flash Tools for Deskpro 4000S and 4000N (586B ROM)

SoftPaq Number SP4683
Filename SP4683.EXE
Size 316K
Date January 06, 1998
Version 586B_122397
Operating System All
Products Affected Deskpro 4000S and 4000N models in the 586B ROM Family. NOTE: Run F10 Setup to determine the ROM Family and ROM date.
Supersedes SP4673

  Download SP4683.EXE  


Readme

SOFTPAQ NUMBER:  SP4683
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  LCM ROM Flash Tools for Deskpro 4000S and 4000N (586B ROM)
VERSION:  586B_122397
LANGUAGE:  English

CATEGORY:  ROMPaqs

PRODUCTS AFFECTED:  Deskpro 4000S and 4000N models in the 586B ROM Family.
NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  Intel LANDesk Configuration Manager

EFFECTIVE DATE:  January 06, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.X

SUPERSEDES:  SP4673

DESCRIPTION:  Creates a set of utility files that can be used with Intel 
LANDesk Configuration Manager (LCM) to upgrade to the 12/23/97 version 
System ROM in the Deskpro 4000S and 4000N models in the 586B ROM Family.  
The ROM Family and ROM date can be determined by running F10 Setup.
LANDesk Configuration Manager is a remote configuration and program loading 
tool for network PCs.
NOTE:  The standard ROMPaq will not run under LCM.

Enhancements/Fixes in this version:

 - Enables the optional Ultra SCSI hard drive to be chosen as the default 
   hard drive upon system start-up.

 - Fixes a problem where the F10/F12 prompt was disappearing 	
   in less than 1 second on systems with two IDE Hard Drives. 
   Added an extra 1 second delay for this configuration and the 
   configuration with two drives on the primary and two drives on 
   the secondary controller. 

 - Fixes a problem where the system would not boot when a LanStreamer
   network card was present.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" confirms the unpacking of several files. 

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. Refer to the file ASSIGNPW.TXT for instructions about the use of the 
utility programs.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home