PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP4681

SP4681 — ROMPaq for Deskpro 4000S and 4000N (586B ROM)

SoftPaq Number SP4681
Filename SP4681.EXE
Size 427K
Date January 06, 1998
Version 586B_122397
Operating System All
Products Affected Deskpro 4000S and 4000N models with a 586B Family ROM NOTE: Run F10 Setup to determine the ROM Family and ROM date.
Supersedes SP4671

  Download SP4681.EXE  


Readme

SOFTPAQ NUMBER:  SP4681
PART NUMBER:  166556-006
FILE NAME:  N/A
TITLE:  ROMPaq for Deskpro 4000S and 4000N (586B ROM)
VERSION:  586B_122397
LANGUAGE:  English

CATEGORY:  Desktops/ROMPaqs 

PRODUCTS AFFECTED:  Deskpro 4000S and 4000N models with a 586B Family ROM
             NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A 

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  January 06, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP4671

DESCRIPTION:  This creates a ROMPaq firmware upgrade diskette to 
upgrade the System ROM to the 12/23/97 version for Deskpro 4000S 
models with a 586B Family ROM.  The ROM Family and ROM date can be 
determined by running F10 Setup.  

Enhancements/Fixes in this version:

 - Enables the optional Ultra SCSI hard drive to be chosen as the default 
   hard drive upon system start-up.

 - Fixes a problem where the F10/F12 prompt was disappearing 	
   in less than 1 second on systems with two IDE Hard Drives. 
   Added an extra 1 second delay for this configuration and the 
   configuration with two drives on the primary and two drives on 
   the secondary controller. 

 - Fixes a problem where the system would not boot when a LanStreamer
   network card was present.

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to select the 12/23/97 
Compaq System ROM and upgrade the firmware.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home