SOFTPAQ NUMBER:  SP4678
PART NUMBER:  270896-004
FILE NAME:  N/A
TITLE:  ROMPaq for Compaq Deskpro 2000 (586M ROM)
VERSION:  586M_111897
LANGUAGE:  English

CATEGORY:  Desktops/ROMPaqs 

PRODUCTS AFFECTED:  Deskpro 2000 models with a 586M Family ROM 
             NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A 

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  10 December 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP4687

DESCRIPTION:  This creates a ROMPaq firmware upgrade diskette to 
upgrade the System ROM to the 11/18/97 version in Deskpro 2000 models 
with a 586M Family ROM.  The ROM Family and ROM date can be determined 
by running F10 Setup.  

Enhancements/Fixes in this version:

 - Added code to verify the administrator password before performing
   a Remote ROM Flash over a network.
 
 - Fixes a problem where the system will not boot when a LanStreamer
   network card is present.
         
HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to select the 11/18/97 
Compaq System ROM and upgrade the firmware.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.