SOFTPAQ NUMBER:  SP4615
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro/ProLinea Windows 95 Universal Video Driver Manager 
VERSION:  1.11.00 Rev A
LANGUAGE:  German

CATEGORY:  Desktops/Drivers

PRODUCTS AFFECTED: 
Deskpro 2000 models: 5100, 5120, 5133, 5166, 5166MMX, 5200, 5200MMX, 
                     5233MMX, 6180, 6200 
Deskpro 4000 models: 5100, 5120, 5133, 5166, 5166MMX, 5200, 5200MMX, 
                     5233MMX, 6180, 6200, 
Deskpro 6000 models: 5166, 5200, 6180, 6200,
                     models announced in September 1997
Deskpro 4100, 450, 466, 575, 590
Deskpro 5100, 5120, 5133, 5150, 5166
Deskpro XL 450, 466, 5100, 5120, 5133, 560, 566, 575, 590, 6150, 6200
ProLinea 4100, 450, 466, 5100, 5100e, 5120, 5120e, 5133, 5150, 5166
ProLinea 575, 575e, 590

OPERATING SYSTEM:  Microsoft Windows 95

SYSTEM CONFIGURATION:  
This Universal Video Driver Manager supports any of the following 
graphics controllers:
Matrox Millennium
Matrox Millennium II
Matrox Performance
Matrox Qvision 2000/2000+ (Drivers only, no Power Desk)
S3 ViRGE
S3 V2
Cirrus Logic 5434
Cirrus Logic 5436
Cirrus Logic 5446
Compaq QVision 1280P/1280P+

EFFECTIVE DATE: 17 September 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP4073

DESCRIPTION:  Unpacks the files needed to install a Windows 95 
application program that detects the type of graphics controller in 
Deskpro and ProLinea computers and installs the appropriate Windows 95 
video driver that supports it.  Optionally, a set of 2 installation 
diskettes can be created.

New features for this version include:
- Support for Matrox Millennium II and Performance Graphics Controllers

Video drivers included in this SoftPaq:
Deskpro 2000/4000 Windows 95 Graphics Drivers Ver 1.91 
Matrox Millennium, Millennium II, Performance Ver 3.70.007 
Matrox Qvision 2000/2000+. Ver 2.01 

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The application may be installed directly from the files on the 
download directory or a set of two diskettes can be created.  
To create a set of diskettes, run MAKEDISK.BAT.
To install the application from the download directory, select Start, 
Run.  Then type the path to the download directory and the application 
name (SETUPUDM.EXE).
Example: 
   c:\<path>\setupudm
Press the Enter key or click OK.

To install the application from diskette, put the first diskette 
created by running MAKEDISK.BAT into the diskette drive. Select Start, 
Run and type the diskette drive path and the application name 
(SETUPUDM.EXE). 
Example:
   a:\setupudm
Press the Enter key or click OK.

5. The Universal Driver Manager detects the current display adapter
and checks to see if it is a supported graphics controller.  If the
currently active graphics controller in the system is not a 
supported controller (see above list), an error message is displayed.

6. If a supported controller is found, a message is displayed
showing which one was found.  Select OK to start installing the driver.
Follow the on-screen instructions and reboot the system to activate
the new driver.

7. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies