| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP4562 — Armada Security 32 Support VERSION 1.00 Rev A LANGUAGE LA Spanish PRODUCTS AFFECTED Compaq Armada 1500, 7300, and 7700 Series OPERATING SYSTEM Microsoft Windows 95 and Windows NT 4.0
| SoftPaq Number |
SP4562 |
| Filename |
SP4562.EXE |
| Size |
802K |
| Date |
10 October 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP4562
PART NUMBER: 297160-161
FILE NAME: N/A
TITLE: Armada Security 32 Support
VERSION: 1.00 Rev A
LANGUAGE: LA Spanish
CATEGORY: Portables/Drivers
PRODUCTS AFFECTED: Compaq Armada 1500, 7300, and 7700 Series
OPERATING SYSTEM: Microsoft Windows 95 and Windows NT 4.0
SYSTEM CONFIGURATION: System ROM dated no earlier than 05/01/97
NOTE: Run F10 Setup to check System ROM date
EFFECTIVE DATE: 19 September 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 3.1
SUPERSEDES: N/A
DESCRIPTION: Unpacks the files needed to install drivers for Compaq
Security 32, a Security Control Panel Extension, on Compaq Armada 1500,
7300, and 7700 Series notebooks running Microsoft Windows 95 or Windows
NT 4.0. Optionally creates an installation diskette.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.
2. From the download directory, execute the SoftPaq. When executed with
no parameters, files are extracted into the current directory. To extract
the files into a different directory, specify the complete path of the
directory as a parameter:
SPxxxx <path>
Enter "Y" to confirm and files are unpacked into the download directory or
the directory specified.
3. After the directory has been created, you may delete the
self-extracting file downloaded in step 1.
4. The application may be installed directly from the unpacked files,
or a diskette can be created.
To create a diskette, run MAKEDISK.BAT.
To install, run SETUP.EXE. Select Start, Run, then enter:
<path>\setup
where <path> = directory chosen in step 2, or
diskette drive letter (such as A:) if installing from
diskette
5. After the installation is completed, you may delete the files created in
step 2.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|