SOFTPAQ SOLUTION:  SP4478
PART NUMBER:  276504-071, 276505-071, 276506-071, 276507-071
FILE NAME:  N/A
TITLE:  Compaq System Configuration Utility
VERSION:  2.37 Rev B
LANGUAGE:  Spanish

CATEGORY:  Diagnostics/Setup

PRODUCTS AFFECTED:  
ProSignia, ProSignia VS, ProSignia 200 Family, ProSignia 300, ProSignia 500,
Systempro, Systempro/E, Systempro/LT, Systempro/XL,
Deskpro/L Family, Deskpro/M Family, Deskpro/XL Family, 
Portable 486, 
ProLiant 800, ProLiant 1000, ProLiant 1500, ProLiant 2500, ProLiant 3000,
ProLiant 2000/4000, ProLiant 4500, ProLiant 5000, ProLiant 6000, 
ProLiant 6500, ProLiant 7000
Rack-Mountable ProLiant Servers 

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  September 25, 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  SP3741

DESCRIPTION:  Creates the four System Configuration For Compaq EISA and 
EISA/PCI Products diskettes, which support all currently shipping 
Systems Division server products. It is installed on the System 
Partition for those systems which support it and have hard drives. It 
is shipped as diskette(s) on all other products.

New Features:

1. This version adds support for the Compaq ProLiant 3000 server.

2. The Hot-Add Reservation Options advanced-mode feature has been added
   to all the PCI Hot-Plug capable servers.

Problems Fixed:

1. In previous versions of the SCU, if an ISA PnP card reported that it
   used a version of the PnP specification later than 1.0A, config would
   not display the correct error panel and would not complete execution.

2. In previous versions, config would reserve too large an amount of 
   memory in the 1 to 16Mb range for any option cards that requested it.
   This can cause multiple problems, such as the Array Configuration
   Utility not executing properly off of floppy disk.  See TRN H970811.001
   for more details.

3. Corrected minor display problems that occur in system configuration 
   utility versions 2.36A or 2.37A that display garbled text for some boards
   in "Step 3: View or edit details" screen. 

HOW TO USE:
                                            
1. Obtain four (4) formatted 1.44-MB diskettes.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskettes in a drive to create the diskettes.

4. After the diskettes have been created, you may delete the  
SoftPaq file downloaded in step 2.

5. To run the Compaq System Configuration Utility, power down your 
computer, place the Compaq System Configuration Utility diskette 1 in 
Drive A:, and power up your computer.

Copyright 1995,1997 Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies