SOFTPAQ NUMBER:  SP4422
PART NUMBER:  275712-004
FILE NAME:  N/A
TITLE:  ROMPaq for ProLiant 1000, 1500, 2000. 4000, 4500, 5000 
VERSION:  3.13 Rev A
LANGUAGE:  English

CATEGORY:  Systems/ROMPaqs

PRODUCTS AFFECTED:  Compaq ProLiant 1000
                    Compaq ProLiant 1500
                    Compaq ProLiant 2000
                    Compaq ProLiant 4000
                    Compaq ProLiant 4500
                    Compaq ProLiant 5000

NOTE:  For SystemPro/XL and Compaq ProSignia Servers, use SoftPaq SP4421
       For ProLiant 800, 850R, and 2500 Servers, use SoftPaq SP4423
       For ProLiant 6000, 6500, and 7000 Servers, use SoftPaq SP4424

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  8 August 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP3541

DESCRIPTION:  Creates the Systems ROMPaq Firmware Upgrade Diskette 
for Compaq ProLiant 1000, 1500, 2000, 4000, 4500, and 5000 Servers.  
This release provides updated system ROM images for Compaq ProLiant 4500 
and Compaq 5000 server products.  System ROM images for the other supported 
servers are included, but remain unchanged from the images on superseded 
SoftPaq SP3541.

	ROM E16  ProLiant 5000 (08/05/97)
	====================================
	Added Ultra Wide SCSI III controller support.

	Fixed problem with Compaq SMART-2SL Array Controller failing during
	POST.

	Corrected problem with Solaris 2.6 installation (would not fully
	install).

	Fixed problem with DIGI AccelePort AR PCI cards not working with
	system.

	ROM E27  ProLiant 1500  (08/05/97)
	====================================
	Fixed problem with Compaq SMART-2SL Array Controller failing during
	POST.

	Corrected problem with Solaris 2.6 installation (would not fully
	install).

	Fixed problem with DIGI AccelePort AR PCI cards not working with
	system.

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5.  Refer to the README file(s) on the diskette for specific upgrade 
instructions and additional help.

Copyright 1997, Compaq Computer Corporation.  All rights
reserved.

Product names mentioned herein may be trademarks and/or
registered trademarks of their respective companies