SOFTPAQ NUMBER:  SP4297
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro 2000 S3 Display Support for NT 4.0
VERSION:  3.10 Rev B
LANGUAGE: FRENCH

CATEGORY:  Drivers/Video

PRODUCTS AFFECTED:  Deskpro 2000 Series with the S3 V2/GX graphics
                    controller, including models announced July 1997 
                    and identified by Config Codes of BKxx or BNxx
NOTE:  To determine whether your unit has the video controller
       supported by this driver, go to the Control Panel and select:
       Display/Settings/Display Type. Verify that the Adapter Type 
       is S3 V2/GX. 

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  Compaq S3 V2/GX video graphics controller

EFFECTIVE DATE: August 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES: SP3284

DESCRIPTION:  This SoftPaq unpacks the files required to install 
the video driver for Windows NT 4.0 for the S3 V2/GX controller 
used in certain Deskpro 2000 models, including those announced in 
July 1997. Optionally allows a driver diskette to be created.
 -   Addresses the displacement of Cpqsetup applet tab page strings
and buttons in APD languages.

HOW TO USE:

1. Download the SoftPaq to a temporary, EMPTY directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or driver diskette can be created. To create a driver diskette,
run MAKEDISK.BAT.
To install the driver, go to the Control Panel and select:

   Display/Settings/Display Type

Verify that the Adapter Type is S3 V2/GX. 
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2.

5. Select OK to install the driver.

6. When the installation is complete, shut down and restart the computer 
for the changes to take effect.

7. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies