SOFTPAQ NUMBER:  SP4160
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro OS/2 Video Driver for Matrox Controllers
VERSION:  2.11.47 Rev A
LANGUAGE:  English

CATEGORY:  Desktops/Driver

PRODUCTS AFFECTED:  Deskpro Series with the Matrox Millennium, Performance, or 
		    Millennium II Graphics Controller, including models announced 
		    August 1997. 
NOTE:  To determine whether your unit has a video controller supported by this 
       driver, go to the OS/2 System, click on System Setup and then Display 
       Driver Install.  Verify that one of the supported Matrox Controllers 
       appears next to the Primary Display check box. 

OPERATING SYSTEM:  IBM OS/2

SYSTEM CONFIGURATION:  Matrox Millennium, Performance, or Millennium II 
Graphics Controller

EFFECTIVE DATE:  August 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP1903

DESCRIPTION:  This SoftPaq unpacks the files required to install 
the video drivers for IBM OS/2 for the Matrox Millennium, Performance
and Millennium II Graphics Controllers used in certain Deskpro models,
including those announced in August 1997.  It optionally allows a driver 
diskette to be created.

HOW TO USE:

1. Download the SoftPaq to a temporary, EMPTY directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or driver diskette can be created.  
To create a driver diskette, run MAKEDISK.BAT.
To install the driver, open an OS/2 full-screen or OS/2 window session.
At the OS/2 command prompt, type in the path to INSTALL.CMD in the download 
directory and press ENTER:
   c:\<path>\install
Follow on-screen instructions and select VGA mode.
Or if installing from a created diskette, enter:
   a:\install

5. When the installation is complete, shut down and restart the computer for 
the changes to take effect.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies