SOFTPAQ NUMBER:  SP4034
PART NUMBER:  N/A
FILE NAME:  N/A	
TITLE:  Deskpro OS/2 ESS 1869 Audio Support
VERSION:  2.10 Rev A
LANGUAGE:  English

CATEGORY:  Desktops/Drivers	

PRODUCTS AFFECTED:  
Certain Deskpro and ProLinea models with the ESS 1869 Audio chipset, including:
Deskpro 2000 5133, Deskpro 2000 6200, Deskpro 5120, 
Deskpro 5133, Deskpro 5150, Deskpro 5166, Deskpro 4000 5166, 
Deskpro 4000 5200, Deskpro 4000 6180, Deskpro 4000 6200, Deskpro 6000 5166, 
Deskpro 6000 5200, Deskpro 6000 6180, Deskpro 6000 6200, Deskpro XL 5100, 
Deskpro XL 5120, Deskpro XL 5133, Deskpro XL 590, Deskpro XL 6150, 
Deskpro XL 6200, ProLinea 5133, ProLinea 5150, and the ProLinea 5166

OPERATING SYSTEM:  IBM OS/2

SYSTEM CONFIGURATION:  ESS 1869 Audio chipset	

EFFECTIVE DATE:  August 15, 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.x

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to install IBM OS/2 audio
drivers for the Compaq ESS 1869 Audio Controller used in the above-
referenced models.  Optionally allows a driver diskette to be created.
 
NOTE: To determine whether your unit has the audio chipset supported by 
      this driver, open an OS/2 Window and run the EINSTALL.EXE program 
      included in the downloaded files. 
      This program first runs ESDETECT.EXE to auto-detect the chip, then 
      calls ESUNINST.EXE to remove old drivers.

HOW TO USE:

1. Download the SoftPaq to an empty directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified. 

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. The driver may be installed directly from the files on the download 
directory or a driver diskette can be created.  
To create a driver diskette, run MAKEDISK.BAT.
For installation instructions, refer to RELEASE.TXT in the 
created directory.

5. After the installation is completed, you may delete the temporary
directory created in step 2.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies