SOFTPAQ NUMBER:  SP3980 
PART NUMBER:  275866
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 4.00
VERSION:  2.00 Rev A
LANGUAGE:  English

CATEGORY:  Systems/Drivers

PRODUCTS AFFECTED:  Systems Products and 
                    Professional Workstations

OPERATING SYSTEM:  Microsoft Windows NT Version 4.00

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  10 June 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP3247 for Windows NT 4.00 only

DESCRIPTION:  This SoftPaq creates the Compaq Support Software for 
Microsoft Windows NT 4.00 diskette plus three other 
diskettes that support the following subsystems and features of 
Compaq Systems products and Professional Workstations:

   NetFlex/NetFlex-2/NetFlex-3 network adapter family
   NetFlex-3 network adapter monitoring, configuration and duplex utility
   Compaq 10T PCI UTP and 10/100 TX PCI UTP
   IDA/IDA-2 disk controller
   SMART/SMART-2 array controller
   32-Bit SCSI-2 Family of controllers
   ProLiant Storage System
   System Management/Health driver
   UPS support
   Compaq HAL Support (ISA, Uniprocessor, and Multiprocessor)
   Compaq Recovery Server, Standby Agent with SMART-2 support
   Compaq Recovery Server, Online Agent with SMART-2 support
   Compaq Remote Insight Board driver
   Compaq Support Software diskette Installation utility

   Matrox Millennium video controller
   ELSA Gloria-L video controller
   ESS AudioDrive audio controller

The following diskettes can be created using the files that 
result when the SoftPaq is unbundled:

        Disk 1 - Compaq Support Software for Microsoft NT 4.00 
                 Disk #1
        Disk 2 - Compaq Support Software for Microsoft NT 4.00 
                 Disk #2
        Disk 3 - Matrox MGA Millennium Video Drivers and ESS 1868 Audio
                 Drivers for Microsoft Windows NT 4.00
        Disk 4 - ELSA Gloria-L Video Drivers for Microsoft Windows NT
                 4.00.

HOW TO USE:

1.  Obtain four formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change
    to that directory.  The file that is downloaded is SP3980.EXE.

3.  From that drive and directory, execute the SoftPaq file:
    SP3980 [ENTER]
    The following files will be created:
    QRST5.EXE
    275866US._01
    275866US._02
    275866US._03
    275866US._04
    275866US.DOC

4.  Please read 275866US.DOC for instructions on using QRST5 to create
    the diskettes and for the steps to install the software.

5.  After the disks are created, you may delete the downloaded file
    SP3980.EXE and the other files it created from your hard drive if you
    wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies