| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP3976 — Deskpro 4000S/4000N S3 Display Support for Windows 95 VERSION 1.80 Rev A
| SoftPaq Number |
SP3976 |
| Filename |
SP3976.EXE |
| Size |
389K |
| Date |
19 September 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP3976
PART NUMBER: 166665-071
FILE NAME: CPQDISP.DRV
TITLE: Deskpro 4000S/4000N S3 Display Support for Windows 95
VERSION: 1.80 Rev A
LANGUAGE: Spanish
CATEGORY: Desktops/Drivers
PRODUCTS AFFECTED: Deskpro 4000S/4000N models with Compaq S3 V2/GX graphics
Controller.
NOTE: To determine whether your unit has the video controller
supported by this driver, go to the Control Panel and select
Display/Settings/Change Display Type. Verify that the Adapter
Type is Compaq S3 V2/GX.
OPERATING SYSTEM: Microsoft Windows 95
SYSTEM CONFIGURATION: Compaq S3 V2/GX PCI graphics controller
EFFECTIVE DATE: September 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: N/A
DESCRIPTION: This SoftPaq unpacks the files required to install
the video driver for Windows 95 for the Compaq S3 V2/GX graphics
controller used in certain Deskpro 4000S/4000N models.
HOW TO USE:
1. Download the SoftPaq to a temporary, empty directory on your
hard drive. The file downloaded is a self-extracting executable
with a filename based on the SoftPaq Number above.
2. From the download directory, execute the SoftPaq. When executed
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete
path of the directory as a parameter:
SPxxxx <path>
Enter "Y" to confirm and files are unpacked into the download
directory or the directory specified.
3. After the files have been created, you may delete the
self-extracting file downloaded in step 1.
4. To install the driver, go to the Control Panel and select:
Display/Settings/Change Display Type
Verify that the Adapter Type is Compaq S3 V2/GX.
If it is not, then Cancel and Exit.
If it is, then continue to select:
Change/Have Disk
Type in the path to the download directory or select "Browse" to
specify the location of the files extracted in step 2.
5. Select OK to install the driver.
6. After the driver has been installed, you may delete the files
from the download directory if you wish.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|