PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP3966

SP3966 — Deskpro 4000S/4000N S3 Display Support for Windows 95 VERSION 1.80 Rev A LANGUAGE Danish PRODUCTS AFFECTED Deskpro 4000S/4000N models with Compaq S3 V2/GX graphics Controller. NOTE To determine whether your unit has the video controller supported by this driver, go to the Control Panel and select Display/Settings/Change Display Type. Verify that the Adapter Type is Compaq S3 V2/GX. OPERATING SYSTEM Microsoft Windows 95

SoftPaq Number SP3966
Filename SP3966.EXE
Size 388K
Date 19 September 97
Version N/A
Operating System All

  Download SP3966.EXE  


Readme

SOFTPAQ NUMBER:  SP3966
PART NUMBER:  166665-081
FILE NAME:  CPQDISP.DRV
TITLE:  Deskpro 4000S/4000N S3 Display Support for Windows 95
VERSION:  1.80 Rev A
LANGUAGE:  Danish

CATEGORY:  Desktops/Drivers

PRODUCTS AFFECTED:  Deskpro 4000S/4000N models with Compaq S3 V2/GX graphics 
                    Controller.
NOTE:  To determine whether your unit has the video controller
       supported by this driver, go to the Control Panel and select
       Display/Settings/Change Display Type. Verify that the Adapter 
       Type is Compaq S3 V2/GX.

OPERATING SYSTEM:  Microsoft Windows 95

SYSTEM CONFIGURATION:  Compaq S3 V2/GX PCI graphics controller

EFFECTIVE DATE:  September 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  N/A

DESCRIPTION:  This SoftPaq unpacks the files required to install 
the video driver for Windows 95 for the Compaq S3 V2/GX graphics 
controller used in certain Deskpro 4000S/4000N models.

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install the driver, go to the Control Panel and select:

   Display/Settings/Change Display Type

Verify that the Adapter Type is Compaq S3 V2/GX. 
If it is not, then Cancel and Exit.
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2.

5. Select OK to install the driver.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home