SOFTPAQ NUMBER:  SP3916
PART NUMBER:  276101-094
FILE NAME:  N/A
TITLE:  Deskpro 2000MMX/4000MMX S3 Display Support for NT 4.0
VERSION:  3.20 Rev D
LANGUAGE:  Norwegian

CATEGORY:  Desktops/Drivers

PRODUCTS AFFECTED:  Deskpro 2000MMX/4000MMX Series with the S3  
                    V2/GX or ViRGE/GX graphics controller. 
                     
NOTE:  To determine whether your unit has the video controller
       supported by this driver, go to Control Panel/Display
       /Settings/Display Type.

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  Compaq S3 V2/GX or ViRGE/GX video graphics controller

EFFECTIVE DATE: 22 July 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  SP3508

DESCRIPTION:  This SoftPaq unpacks the files required to install 
the video driver for Windows NT 4.0 for the S3 V2/GX or ViRGE/GX 
controller used in certain Deskpro 2000MMX/4000MMX models, including those 
announced in July 1997.
This version addresses failures occurring in Microsoft NT WHQL, 
HCT, and Direct Draw testing.

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install the driver, go to the Control Panel and select:

   Display/Settings/Display Type

Verify that the Adapter Type is S3 V2/GX or ViRGE/GX. 
If it is not, then cancel and exit.
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2.

5. Select OK to install the driver.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies